文档下载 文档下载导航
设为首页 | 加入收藏
搜索 请输入内容:  
 导航当前位置: 文档下载 > 所有分类 > IT/计算机 > HP StorageWorks Brocade Fibre Channel host bus adapters release notes
侵权投诉

HP StorageWorks Brocade Fibre Channel host bus adapters release notes

HP 光线HBA介绍

Before installing, upgrading, or uninstalling HP-branded Brocade drivers, back up the Ramdisk. Zoning by HBA is required for HP-branded Brocade HBAs with version 1.1.0.6. Upgrading theBIOS and driver to version 1.1.0.8 or higher will remove this requirement.

HP requires that the HBA BIOS be disabled on HBAs that are not part of Boot from SAN.

HP-branded Brocade HBAs have the default BIOS option set to Auto Discovery. Use of this featureis documented in the Brocade installation and user guide in the boot over SAN chapter. If you donot want to use this feature, change the BIOS option to Flash.

NOTE:

HP StorageWorks Brocade Fibre Channel host bus adapters release notes

HP recommends that you not use the option Boot first LUN.

Boot from SAN on an MSA2000 G1 is not supported on Linux.

DL180 G5, DL180 G6, DL320 G6, DL370 G6 RHEL Boot from SAN requires use of an externalUSB CDROM/DVD to load the driver update disk.

If you have an MSA2000/2300 configured with LUN 0 as a data LUN, you must reboot to dis-cover LUN 0.

HP supports installing, upgrading, and uninstalling drivers through the Brocade integrated installeron Linux distributions.

HP recommends setting the timeout value to 28 seconds in multipathing configurations for Linuxservers.

# bcu fcpim --mpiomode <port_ID> off 28

Red Hat 5 Update 4 and Red Hat Update 3 have been qualified, and are only supported withthe ext3 file system. All versions of SLES 11 have also been qualified, and are only supportedwith ext2 and ext3 file systems.

Heterogeneous vendor Fibre Channel HBAs are not supported on the same server.

Windows requires the following hotfixes:

Windows 2003 R2 SP2 with QFE950448 – x86 and x64

Windows 2008 with QFE 953390 – x86 and x64

The MSA2x00 path timeout value for Windows should be set to 60 using the Host ConnectivityManager.

1.Right click the HBA.

2.From the menu, select Port Configuration-> Basic.

3.Ensure that the MPIO mode enable box is not selected.

4.Change path timeout value to 60.

For SLES 11 Linux no-arch RPM and Boot from SAN configurations, edit the command # /etc/modprobe.d/unsupported-modules and set allow_unsupported_modules to 1. Thisprocedure applies only to driver version 1.1.0.6 and 1.1.0.8.

Once done, run mkinitrd, then reboot the server.

# mkinitrd –k /boot/vmlinuz– 'uname–r' –I /boot/initrd– 'uname –r' For SLES 10 SP2 Linux no-arch RPM and Boot from SAN configurations, set the sysconfig

variable load_unsupported_modules_automatically in /etc/sysconfig/hardware/config to yes. This procedure applies only to driver version 1.1.0.6 and 1.1.0.8.

Once done, run depmod and mkinitrd, then reboot the server.

# mkinitrd –k /boot/vmlinuz– 'uname–r' –I /boot/initrd– 'uname –r'8

上一页第8页

你可能喜欢

热门文档

相关文档

  • HP HBA卡兼容列表

    QuickSpecs Overview HP StorageWorks 4Gb PCIe Fibre Channel Host Bus Adapters ...1.hp.com/products/storageworks/san/documentation.html Models Brocade HP ...

  • HP 82Q 8Gb Dual Port PCI-e FC HBA

    Fibre Channel Host Bus Adapters brings datacenter infrastructure components to ...HP StorageWorks 8Gb PCI-e FC HBAs Models Brocade Description HP StorageWorks...

  • Brocade 4Gb SAN Switch for HP c-Class BladeSystem_1...

    Brocade 4Gb SAN Switch for HP c-Class ...Previously, deployments using Fibre Channel-based ...HP StorageWorks Data Center Fabric Manager ...

  • 博科HBA卡4Gb,8Gb-HBA_兼容性列表

    Host Bus Adapters (HBAs): ? ? ? ? Brocade 825 Fibre Channel (FC) HBA...HP StorageWorks MSL4048 IBM 3582 Tape Library (LTO) IBM 3592-J1A ...

  • HBA卡 HP VS. EMULEX 名称对照表

    Fibre Channel Host Bus Adapters (HBA) Hewlett-Packard ships HP-branded ...HP StorageWorks Enterprise Backup Solution (EBS) Server Family ProLiant ...

  • HP刀片方案--2013.03.18

    1*10Gb级 HP Brocade 8/12 SAN Switch 1 8Gb 光纤交换机;12口可用(8个...HP QMH2572 双端口8Gb Fibre Channel Host Bus Adapter HP StorageWorks P2000 ...

  • IBM b-type 系列交换机同 Brocade 交换机的对应关系

    Brocade 8 Gbit/sec fibre channel (FC) host bus adapters (HBAs) for IBM System x are part of a family of high-performance 8 Gbit/sec HBA solutions...

  • DELL 存储纵览 support matrix

    14? Supported Fibre Channel Host Bus Adapters .....16? Supported Brocade & Dell PowerConnect FOS ...Release 2 Windows Server 2008 Release 2 (with ...

  • 6.5_SAN_CLINET

    verified using OEM IBM Fibre Channel adapters. ...Brocade, Emulex, and QLogic supplied drivers are ... consideration for the NetBackup 6.5.2 release....

  • Hardware Compatibility List

    24 See Note 1 HCL Release Revision 1.4, 19 ...Host Bus Adapters All Fibre Channel and iSCSI ...Note 12: For the HP StorageWorks Enterprise ...

站点地图 | 文档上传 | 侵权投诉 | 手机版
本站所有资源均来自互联网,本站只负责收集和整理,均不承担任何法律责任,如有侵权等其它行为请联系我们.
文档下载 Copyright 2013 doc.guandang.net All Rights Reserved.  -  email