HP 光线HBA介绍
Installing PSP on Linux servers may rebuild Ramdisk with the name HP-initrd-img and updategrub boot order. After installing the Brocade kit, edit /boot/grub/menu.lst (default=X)to reflect initrd-.img as the default boot . This procedure applies only to driver version 1.1.0.6and 1.1.0.8.
Dynamic addition of XP targets/LUNS may require a system reboot for the operating system todetect the device.
HP does not support the use of NPIV with Brocade HBAs running under ESX server, version 3.5and version 4.0.
The following SLES 11 kernel versions are not supported:
2.6.27.23-0.1
2.6.27.25-0.1
2.6.27.29-0.1
The following SLES 11kernel versions are supported:
2.6.27.19-0.1
2.6.27.37-0.1
2.6.27.39-0.3.1
Performing an offline BIOS update
To perform an offline BIOS update on an HP-branded Brocade HBA that has been installed on thehost system, do the following.
1.
2.
3.
4.
5.Create a CD from the Offline BIOS Upgrade Installation .ISO image.Insert the CD to the CD/DVD drive, then boot the system.Follow the on-screen prompts and instructions to boot.Access the system’s command shell so that you can issue BCU commands.To update HBA boot code, enter the following BCU command:
# bcu boot --upload <adapter id> <image file> –a
where:
<ad_id> is the ID of the adapter (HBA).
<image file> is the name of the firmware image file.
-a indicates that the boot code should be uploaded to all installed Brocade HBAs on the host.The adapter identification <ad_id> should not be given if the –a option is also specified.Examples:
Update HBA boot code for HBA 1:
#bcu boot --upload 1 bfa_boot_fw
Update HBA boot code for all HBAs:
#bcu boot --upload bfa_boot_fw -a
6.Reboot the system.
Compatibility and interoperability
The HBAs support the servers and switches described in “Devices supported” on page 4, andsupport the operating systems described in “Operating systems” on page 5.
HP recommends zoning by HBA, as described in the HP StorageWorks SAN design referenceguide, available on the following websiteHP StorageWorks Brocade Fibre Channel host bus adapters release notes9
QuickSpecs Overview HP StorageWorks 4Gb PCIe Fibre Channel Host Bus Adapters ...1.hp.com/products/storageworks/san/documentation.html Models Brocade HP ...
Fibre Channel Host Bus Adapters brings datacenter infrastructure components to ...HP StorageWorks 8Gb PCI-e FC HBAs Models Brocade Description HP StorageWorks...
Brocade 4Gb SAN Switch for HP c-Class ...Previously, deployments using Fibre Channel-based ...HP StorageWorks Data Center Fabric Manager ...
Host Bus Adapters (HBAs): ? ? ? ? Brocade 825 Fibre Channel (FC) HBA...HP StorageWorks MSL4048 IBM 3582 Tape Library (LTO) IBM 3592-J1A ...
Fibre Channel Host Bus Adapters (HBA) Hewlett-Packard ships HP-branded ...HP StorageWorks Enterprise Backup Solution (EBS) Server Family ProLiant ...
1*10Gb级 HP Brocade 8/12 SAN Switch 1 8Gb 光纤交换机;12口可用(8个...HP QMH2572 双端口8Gb Fibre Channel Host Bus Adapter HP StorageWorks P2000 ...
Brocade 8 Gbit/sec fibre channel (FC) host bus adapters (HBAs) for IBM System x are part of a family of high-performance 8 Gbit/sec HBA solutions...
14? Supported Fibre Channel Host Bus Adapters .....16? Supported Brocade & Dell PowerConnect FOS ...Release 2 Windows Server 2008 Release 2 (with ...
verified using OEM IBM Fibre Channel adapters. ...Brocade, Emulex, and QLogic supplied drivers are ... consideration for the NetBackup 6.5.2 release....
24 See Note 1 HCL Release Revision 1.4, 19 ...Host Bus Adapters All Fibre Channel and iSCSI ...Note 12: For the HP StorageWorks Enterprise ...
热门文档