s
22ωb Sd Cms
,Zvc=Ze+
+ZesZeb
Equivalent to (12)
1
Map=
(11)
and
(18)
ωb=
1,Zvc=Ze+Zec
where
1
.
Map Cab
(19)
(12)
The electrical impedance at the voice coil terminalswill be given by (11),taking(10)and(17) intoaccount.
2.4.4 Order Band Pass
th
Zec=Zes+Zeb=
s2
2
Zac Sd
B2
,(13)
s++1ω Q1+αωcc c,Zac=2sSd Cms
(14)
The 4ªorder band pass enclosure has one sealed
chamber and a tuned one.The equivalent circuit isshowed in Figure7.The leakage losses between thetwo chambers where not taken into account in this

work.
ωc=ωs =2π Fs Vα=as.
Vb
2.3.Vented Box
(15)
(16)
In a bass reflex enclosure,the acoustical loadpresented to the drivercorresponds to aresistanceRal (representing the leakage losses),inparallel with a complianceCab (the air trappedinside the box),in parallel with an inertanceMap(modeling the air in the port).See

Figure 6.
Figure 7.Acoustical equivalent circuit of a 4ª order band pass enclosure.
Then,
Za=Zb1+Zb2,
(20)
s+
Zb1=Rab1 Zb2=Map2
1Cab1 Rab1
ss
.
(21)
s++1Qωb2b2L2
s2
(22)
The electrical impedance at the voice coil terminals
will be given by (23),
Figure 6. Equivalent circuit of a bass reflex enclosure.
The acoustical impedance will be given by (17)
Zvc=Ze+
Za=Zb=Map
s
s++12ω QωbbLs2
,
(17)
11
++
ZesZeb1Zeb2
11
,
(23)
where
whereZeb1 andZeb2will be given by (10).Allconsiderations made to the closed box and the bassreflex enclosure will also apply,noting that
AES 115TH CONVENTION, NEW YORK, NEW YORK, 2003 OCTOBER 10-13
热门文档