永磁同步电机永磁体抗去磁能力的研究
Figures 11 to 15 show the zero sequence current spectrum, which is the algebraic sum of the third harmonic current of the rotor for each phase and its multiples, except for the stator’s third harmonics because of the star connection of the winding without neutral.
Using this current’s spectrum it is possible to determine the permanent magnet demagnetization fault for high and low speeds, especially in the third harmonic, yet also for harmonics 6, 12 and 15 with high and medium speeds. The differences in amplitude for these harmonics range from 2.5 to 1.5 times, and they are smaller at low speeds.
The zero sequence current adds the first harmonic to its multiples vectorially. Given the 120 degree gap between phases in the first harmonic, this is cancelled, and so are its multiples, except for the third harmonics. Since these are fault indicators, and cannot be cancelled by the zero current sequence, fault condition of whatever type will become more obvious in their case, including stator tension imbalances. It is simple to obtain the zero sequence current, either by adding the three phase currents, or by directly measuring on the conductors.

Amplitude (pu)Harmonics
IV. CONCLUSIONS
The variations in amplitude of the value of the harmonics for motors with demagnetization faults on the range of speeds force the consideration of more than one harmonic for the detection of faults. Hence, it will be the overall behavior of all of them which will enable the determination of the fault condition.
The zero sequence current makes is possible to determine the permanent magnet demagnetization fault in high and low speeds with a correct degree of accurateness and determination.
The stator current harmonics show the fault condition for medium and high speeds. The proper combination of the analyses of current and speed, or stator and zero sequence current, or zero sequence and q axis current enables fault determination for any range of speeds. Furthermore, this analysis can be extended to the remaining faults, such as eccentricities and bearing faults.

Amplitude (pu)
Fig. 10. Stator current harmonics for PMSM. 300 rpm.

Amplitude (pu)Fig. 13. Zero sequence current harmonics for PMSM. 3000 rpm.
Amplitude (pu)
Harmonics

Harmonics
Fig. 11. Zero sequence current harmonics for PMSM. 6000 rpm.
Amplitude (pu)

Fig. 14. Zero sequence current harmonics for PMSM. 1500 rpm.

Harmonics
Harmonics
Fig. 12. Zero sequence current harmonics for PMSM. 4500 rpm.
Harmonics
Amplitude (pu)
Fig. 15. Zero sequence current harmonics for PMSM. 300 rpm.
Demagnetization Analysis of Permanent Magnet Synchronous Machines under Short Circuit Fault 隐藏>> Demagnetization Analysis of Permanent Magnet Synchronous Machines...
Influence+of+design+parameters+on__+cogging+torque+in+permanent+magnet+...Influence of Design Parameters on Cogging Torque in Permanent Magnet Machines ...
(cont’d) Transients or machine faults can lead to a worst-case demagnetization as shown which results in permanent demagnetization of the permanent magnet...
536. , “Comparative study of permanent magnet brushless machines [10] with...uence of design parameters on cogging torque in permanent magnet machines,”...
The Feasibility Study of Permanent Magnet Coupling Applied in Scraper Conveyor_理学_高等教育_教育专区。The Feasibility Study of Permanent Magnet Coupling ...
Researches on End Effects of Permanent Magnet Electromagnetic Launchers_天文/地理_自然科学_专业资料。201 3年 第1 3期 SCIENCE&TECHNOLOGY INFORMATION 0外语论...
Permanent Magnet Rotor Assembly_机械/仪表_工程科技_专业资料。永磁结构设计...magnets to have Br = 10 kG and a linear second quadrant demagnetization ...
Influence of Design Parameters on Cogging Torque in Directly Driven Permanent Magnet Synchronous_专业资料。今日推荐 50份文档 2014年注册会计师考试...
Localization for the Non-Invasive Detecting Capsule in GI Tract Utilizing Permanent Magnet and M_专业资料。维普资讯 http://www.cqvip.com Junlora ofDogu ...
Torque in Directly Driven Permanent Magnet Synchronous_机械/仪表_工程科技_专业...Sebastian. “Study of cogging torque in permanent magnet machines”. IEEE ...
热门文档