Fig.1. Schematic view of muti_press forming machine
However,

there are still a number of key technological problems that need to be solved for automatic dieless multi-point forming. Springback is one of the major problems of MPPF as it is with other mechanical bending methods. When the presses are released after the forming stage, the plate springs back due to elastic recovery [12]. Because the geometric tolerances can be tight for hull plate assembly, this shape deviation can become unacceptable. Springback can also make it difficult to approach the desired design shape at the first forming. The desired shape can, however, be efficiently achieved by an iterative process of bending and compensation. Therefore, springback compensation is necessary so that the punches of a multi-point press are adjusted such that the manufactured plate becomes geometrically accurate.
Redesigning or adjusting the tools manually to achieve the design shape for the manufactured plate is a time consuming process. Furthermore, because a hull surface is assembled from several hundreds of pieces of curved plate, an integrated system is required in order to automatically calculate the adjusted piston strokes.
Several completely automatic springback compensation algorithms have been reported and tested in previous studies [11], [12], [13], [14] and [15]. The algorithm of the Displacement Adjustment (DA) method uses the shape deviation between the manufactured product and the desired shape, multiplied with modifying factors on each of the piston points, as a compensation function for the geometry of the tools. The advantages of the DA method are that the modification of the controlled stroke can also be carried out with a finite element analysis (FEA), and that it is possible to control the algorithm automatically.
The goal of this paper is to develop an integrated system that can automatically perform the springback compensation process and the calculation of piston strokes. Taking into consideration the predicted shape obtained by FEA, iterative displacement adjustment modifies the offset of pressing punches. We select the DA algorithm specifically applied to the bending of thick plate. FEA and the DA are incorporated in an integrated system so that the system can iteratively calculate the compensated geometry of a multi-point press. Here, a surface with a limited set of points is used to compare and evaluate the desired product shape and the unfolded shape, and to modify the strokes. For the practical application of this method, a program system has been developed to automatically offset the strokes of punches for the MPF procedure.
2. Data procedure in multi-point forming
2.1. Geometric data flow in multi-point forming
Process design for multi... 暂无评价 6页 2.00元 Method of closed loop... Springback adjustment fo... 暂无评价 13页 免费 Enhancement of Increment.....
Multicore Bundle Adjustment-Manual_计算机软件及应用_IT/计算机_专业资料。三维计算机视觉匹配相关资料Multicore Bundle Adjustment Manual Changchang Wu University of...
Multi--scale Approach for CFRP Composite Simulation by JSTAMP-NV and DIGIMAT_材料科学_工程科技_专业资料。Multi-scale Approach for CFRP Composite Simulation...
for sheet metal part, multi-point forming (MPF) technology is discussed in...3.1 Element group design and shape adjusting mode Height adjustment for ...
216-219. ON MULTI-IMAGE RECONSTRUCTION FROM HISTORIC PHOTOGRAPHS I. ...Multi-image Adjustment of Historic Images of Unknown Orientation with the ...
However, there are no analytical models for variation analysis in multi-station compliant assembly systems. It is critical to develop realistic models for ...
Similar to freeways except inclusion of a few different adjustment factors to determine FFS ? Base conditions for multi-lane highways: – 12’ lanes – ...
Site design plane adjustment work is heavy, if modify the design elevation,...In modern construction engineering, general multi-storey buildings when the ...
热门文档