Generally, fitting and fairing the lines drawn from the data of ship offsets is often the beginning of the ship hull design procedure. The hull design procedure defines the surface of the ship hull, which approximates the points belonging to the hull [16]. Welding lines of the seam and butt are defined on the hull surface according to the plan of the block division. Thereafter, the hull surface is divided into many pieces that will be developed or unfolded into the two-dimensional (2D) flat pieces. The design surfaces are first trimmed from the three dimensional surface of the hull form. Thereafter, the pieces are unfolded onto the flat plates [17]. For most of the pieces, flame bending or press bending is applied to produce the desired shape. The schematic data flow of the desired surface and unfolded surface in the hull plate design is explained in Fig.2.
Fig.2. Data flow of desired surface and unfolded surface in hull piece design

For the application of multi-point forming, the initial stroke of each press is obtained from the displacement difference between the curved design surface and the flat unfolded surface. The frame coordinate of the design surface extracted from the computer-aided design (CAD) of a ship differs from that of the unfolded surface calculated by the unfolding module, for which a preprocessing step for surface matching, such as ‘surface registration’ or ‘localization’, is required [18], [19], [20], [21] and [22]. Having two sets of point data, a surface matching process in which geometric shapes are represented by sparse points is then carried out, and the difference between pressing points is calculated through surface matching by a combination of the iterative closest Point (ICP) algorithm and the localization algorithm suggested in various studies [18], [19],[20], [21] and [22].
Sparse points on the desired surface are taken, and a corresponding set of points on the unfolded surface is determined. Comparing the displacement difference between the unfolded surface and the design surface, the initial stroke of each press is determined. Fig. 3 introduces in detail the overall process of the extraction of surfaces, the role of the ICP algorithm, and the determination of the amount of springback compensation. The surface registration describes the rotation and translation matrix to fit the unfolding surface for the desired surface. The ICP approach to register the surfaces is reported in various studies [18], [19], [20],[21] and [22] and is thus not detailed in this paper. Displacement Adjustment accounts for the offset of the pressing tool in conjunction with the deformation prediction. First, the object surfaces and unfolded surfaces are matched together
Process design for multi... 暂无评价 6页 2.00元 Method of closed loop... Springback adjustment fo... 暂无评价 13页 免费 Enhancement of Increment.....
Multicore Bundle Adjustment-Manual_计算机软件及应用_IT/计算机_专业资料。三维计算机视觉匹配相关资料Multicore Bundle Adjustment Manual Changchang Wu University of...
Multi--scale Approach for CFRP Composite Simulation by JSTAMP-NV and DIGIMAT_材料科学_工程科技_专业资料。Multi-scale Approach for CFRP Composite Simulation...
for sheet metal part, multi-point forming (MPF) technology is discussed in...3.1 Element group design and shape adjusting mode Height adjustment for ...
216-219. ON MULTI-IMAGE RECONSTRUCTION FROM HISTORIC PHOTOGRAPHS I. ...Multi-image Adjustment of Historic Images of Unknown Orientation with the ...
However, there are no analytical models for variation analysis in multi-station compliant assembly systems. It is critical to develop realistic models for ...
Similar to freeways except inclusion of a few different adjustment factors to determine FFS ? Base conditions for multi-lane highways: – 12’ lanes – ...
Site design plane adjustment work is heavy, if modify the design elevation,...In modern construction engineering, general multi-storey buildings when the ...
热门文档