对桥楼设备布置提供参考
MSC/Circ.982 ANNEX Page 4
通信控制台:
Workstation for operation and control of equipment for distress and safety communications (GMDSS) and general communications.
该控制台用于操纵及控制遇险及安全通信设备(GMDSS)和常规通讯设备。
monitoring
navigating and manoeuvering
manual steering
docking
AND
safety
docking
图一: 船舶驾驶室功能区范例-各控制台可能的布局 附录二中列出了各控制台推荐安装的设备
In APPENDIX 2 the recommended equipment for the various workstations is listed. Ergonomic Requirements
人体功能学要求、
5.1 Bridge Layout (驾驶室设计)
者500米的距离范围(两者取小值),并不被遮挡。
5.1.1.1.2 Field of Vision around the Ship (船舶周围视距)
There should be a field of vision around the vessel of 360° obtained by an observer moving within the confines of the wheelhouse.
在驾驶室范围内的移动应能够观察到船舶周围360度范围的景象。
5.1.1.1.3 Navigating and Maneuvering Workstation (航行操纵控制台)
The horizontal field of vision from the navigating and maneuvering workstation should extend over an arc of not less than 225°, that is from right ahead to not less than 22.5°, abaft the beam on either side of the ship.
从航行操纵控制台的水平视角范围延伸角度不小于225度,即从船艏正前方至两翼方向不小于112.5度
I:\CIRC\MSC\982.doc
AL
从航行操纵控制台至海平面的船艏向到两翼各10度的视域应在任何吃水,船舶水平及甲板载货的情况下,大于两倍船长或
L
The view of the sea surface from the navigating and maneuvering workstation should not be obscured by more than two ship lengths or 500 m, whichever is less, forward of the bow to 10° on either side under all conditions of draught, trim and deck cargo.
RI
G
H
5.1.1.1.1 Minimum Field of Vision (最低视野要求)
T
RE
5.1.1 Sight (视域)
5.1.1.1 Field of Vision (可视范围)
SER
VED
BY R
Fig. 1: Example of function areas - showing a possible location of workstations
AD
IO
H
planning and documentation
O
communication
LL
-有关驾驶室两翼的舵角指示器和推进器转速指示器的问题_机械/仪表_工程科技_...驾驶室设计和相关设备布 置应使用合适的标准(如:ISO 8468或MSC/Circ.982); ...
热门文档