BNS,空间光调制器,文献

Fig. 1. Simulation results of linearly controlling the power of a single spot with a resolution of
0.002 by GSW. (a) Use the same weighting as Eq. (1) in Ref. [3]. and set the convergence
parameter to 0.25 to linearly adjust the power at a single spot (Media 1) located in signal area
362 × 362 centering in hologram 512 × 512; during the iterations per aiming power, the
generated complex amplitudes in dummy area are kept until the desired power is obtained,
there are two spots containing most power of dummy area. (b) 500 equidistant powers of spot
(128, 128, 0) are obtained in more than 9 hours by Matlab in PC with 2.8GHz Intel Pentium D
820 CPU and 512MB Memory, and (c) the number of iterations per aiming power is less than
500, and by average, 105 iterations.

2. Tunable binary phase grating
Fig. 2. Tunable binary phase grating. (a) Phase profile. (b) 2D gray image.
The controlling of total spot power is accomplished via binary phase grating BG shown in Fig. 2 above. In order to yield a maximal angle of view, the period of grating is made two pixel widths 2dpixel, during which one pixel is modulated to phase zero and the other to phase φ.
The complex far-field amplitude resulting from a monochromatic plane wave which is normal incident on the binary phase grating can, according to Fraunhofer diffraction integral
[15], be written as
i BG x U =CF e
C n δ 2n 2dpixel in n i in sinc 1 ee e2 2 (1)
represents Fourier Transform, C is a complex constant, is spatial frequency,
and sinc x sin x x. where F
As reported in [16], the intensity of diffractive zero order (n = 0) of binary phase grating BG is a simple cosine function of phase depth φ between two adjacent pixels,
2I0 U
=I0 1 cos (2)
#141925 - $15.00 USDReceived 28 Jan 2011; revised 23 Mar 2011; accepted 10 Apr 2011; published 18 Apr 2011
(C) 2011 OSA25 April 2011 / Vol. 19, No. 9 / OPTICS EXPRESS 8500
热门文档