Multi-Direction Layered Deposition – An Overview of Process
Planning Methodologies
Prabhjot Singh and Debasish Dutta
Department of MechanicalEngineering
University of Michigan, Ann Arbor, MI 48109
Abstract
Layered Manufacturing(LM) techniques builda partby adding thin layers of material. In many LMprocesses overhangs require the deposition of sacrificial supports resulting in an increase in the build time, wastageof material and costly post-processing. This hasled to the development of LM systems which can deposit material along multiple directions and eliminate the need for supports.Wesurvey the configurations of available multi-direction deposition systems. An overview of theprocess planning challenges is presented. Literature on process planning methodologies is reviewed.
1.0Introduction
Layered Manufacturing (LM) processes have developed the ability to deposit a variety of materials with an increased emphasis on the fabrication of functional prototypes. There is a vast body of literature covering various aspects of Layered Manufacturing processes. The interested reader is directed towards [8] for a survey of LM processes and the Proceedings of the annual Solid Freeform Fabrication Proceedingshosted by the University of Texas, Austin.
In this paper we will concern ourselves with a specific set of LM processes which can deposit material along multiple directions. The development of these processes has been motivated by two salient characteristics of LM processes, namely the need forsupport structures to deposit overhanging features (refer Figure 1a) and the so called staircase effect. The staircase effect concerns theapproximate construction of surfaces which are not aligned along the build (deposition) direction and is qualified by the cusp height (Ref. Figure 1b). The cumulative effect of these is a longer build time, material


wastage, deterioration of surface quality and time consuming post processing. Cusp Height
G
Build
Direction
(a)Supports required(b) Approximate Surface
– Staircase effect
Figure 1: The need for multi-direction layered deposition
Multi-layered Tissues in Standard C Lihong Wang,...Therefore, we chose to record photon deposition ...direction around an annular ring, and the total ...
Ballistic performance of multi-layered metallic plates impacted by a 7.62-mm...the plate, while keeping the same element thickness in the impact direction...
direction of substrate movement, will principally ...OLEDs usually consist of multi-layered structures ...deposition, a different approach has to be used....
Selective area deposition of TiN-Nick alloy coating-an alternative for decorative chromium plating 隐藏>> Journal of Applied Electrochemistry (2007) 37:219–...
Layered networking: core layer, convergence layer, and edge layer The equipment...According to the forecast of traffic flow direction, set a convergence node...
Longitudinal Electromagnetic Surface Tamm States of Multi-layered Semi-infinite Conducting Heter_专业资料。JuaoMarlSic dnien 2(021511orlftiscnen gnrgB2()21)8-9...
Analysis on the deflection of multi-layered ceramic capacitors due to high pressure_冶金/矿山/地质_工程科技_专业资料。This article was downloaded by: [Tsin...
PR China Received 13 November 2006; received in ...additive layered manufacturing manner from the CAD ...deposition direction at the center of the plate ...
? ? The layered architecture of DisplayPort allows it to be extensible to ...(either direction) 8B/10B encoded Includes link training DisplayPort Physical...
Optimal Multi-layered ... 暂无评价 31页 免费 (OSCE) Performance Enh... ...ective paths for charge transport along the layer direction, without the use...
热门文档