POWERSOFT® AE 66
SILICONE SOFTENER EMULSION CONCENTRATE Product description
POWERSOFT® AE 66 is a nonionic micro emulsion concentrate of an aminomodified silicone fluid.
Application
POWERSOFT® AE 66 is particularly suitable for the impregnation of fibers and textiles.
POWERSOFT® AE 66 imparts a very soft, smooth and elastic touch, additionally to woven and knitted fabrics.
POWERSOFT® AE 66 improves the wash-and-wear properties and the crease recovery angle and tear strength and reduces abrasion loss. The effects are fast to washing and dry cleaning.
POWERSOFT® AE 66 has very little effect on the degree of whiteness when usual application conditions are adhered to. Generally, no adverse effect on the shade or colour fastness properties of coloured goods is observed.
Processing
POWERSOFT® AE 66 provides permanent effects even without the addition of a catalyst. Specific curing conditions need not be adhered to if no resins are used.
POWERSOFT® AE 66 can be applied either by padding or by the exhaust method but, as with all products containing silicone, the finishing liquors should not be subjected to high shear, as this might cause instability.
5-30 g/l POWERSOFT® AE 66 are recommended for the pad method. For the exhaust method 1-3 %, relative to the weight of goods are adequate and the treatment should be carried out at 40-50 °C for 15-20 minutes. The pH of the liquor should not exceed pH 5. It may need to be adjusted with acetic acid.
POWERSOFT® AE 66 can be applied either alone or together with resins and other finishing agents. If POWERSOFT® AE 66 is used together with
crosslinking agents and other additives, it should be added, in diluted form, after all the other products. (This recommendation applies generally to the processing of all polysiloxanes).
Higher crease recovery angles and lower abrasion values can be obtained in resin finishes by using POWERSOFT® AE 66. A wide range of touches can be obtained by combining POWERSOFT® AE 66 with conventional softening agents and other additives such as fillers based on polyacrylate.
Typical recipes:
Woven and knitted materials of synthetic fibres
0.5 ml/l acetic acid 60 %
10-30 g/l POWERSOFT® AE 66
pad, liquor pick-up about 50 %, dry at 120-150 °C
Single jersey or interlock cotton fabrics (exhaust method)
0.5 ml/l acetic acid 60 %
2-4 g/l POWERSOFT® AE 66
10-30 minutes at 30-40 °C, without rinsing, hydroextract, dry at 100-150 °C
Storage
The "Best use before end" date of each batch is shown on the product label.
Emulsions showing signs of creaming should be agitated before use to assure uniform consistency.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Safety notes
Comprehensive instructions are given in the
corresponding Material Safety Data Sheets. They are available on request from WACKER subsidiaries or may be printed via WACKER web site doc.guandang.net.
Technical data sheet for POWERSOFT® AE 66 / Version: 1.0 / Date of last alteration: 08.02.2008 1 / 2
蓝色创意-AE培训资料精华版-66p 蓝色创意-AE培训资料精华版-66p蓝色创意-AE培训资料精华版-66p隐藏>> 谋划者 for:蓝创AE岗位职责交流 AE是什么?不是Creative(...
e9c604bb-aa12-42b2-ae82-66c488a9f008_教学实施计划1_教学案例/设计_教学研究_教育专区。教学实施计划教学单元实施前的准备 单元课程名称 课时安排 上课时间 ...
{6E534AE4-D579-4A66-B94D-576697729359}.实验四 平面应变断裂韧性K1c的测定 平面应变断裂韧性K1c的测定平面应变断裂韧性K1c的测定隐藏>> 平面应变断裂韧性K ...
66ae25bc-9230-4edb-80e9-c9da9921b9c3 教案教案隐藏>> 2012 中考思品复习资料 九年级思品复习讲义(第 9---10 课)命题人:王迎丽 审核人:李维春 班级 ...
{6E534AE4-D579-4A66-B94D-576697729359}.实验四 平面应变断裂韧性K1c的测定 平面应变断裂韧性K1c的测定平面应变断裂韧性K1c的测定隐藏>> 平面应变断裂韧性K ...
热门文档