from the materials database) If you are modeling species transport or multiphase flow, the Material Name list will not appear in the Fluid dialog box. For species calculations, the mixture material for all fluid zones will be the material you specified in the Species Model dialog box.
Specifying a Laminar Zone:When you are calculating a turbulent flow, it is possible to “turn o ” turbulence modeling in a specific fluid zone. To disable turbulence modeling, turn on the Laminar Zone option in the Fluid dialog box. This will disable the turbulence production, but transport the turbulence quantities. If, in addition, you want to set the turbulent viscosity to zero you can do that using the text command define/ boundary-conditions/fluid. You will be
asked if you want to Set Turbulent Viscosity to zero within laminar zone?. If your response is yes, ANSYS FLUENT will set both the production term in the turbulence transport equation and µt to zero 。This is useful if you know that the flow in a certain region is laminar.这个和壁面边界的应用有什么关系?
This feature allows you to model turbulent transition on the airfoil.
Specifying a Reaction Mechanism:If you are modeling species transport with reactions, you can enable a reaction mechanism in a fluid zone by turning on the Reaction option and selecting an available mechanism from the Reaction Mechanism drop-down list
Specifying the Rotation Axis:If there are rotationally periodic boundaries adjacent to the fluid zone or if the zone is rotating, you must specify the rotation axis;For 3D problems, the axis of rotation is the vector from the Rotation-Axis Origin in the direction of the vector given by your Rotation-Axis Direction inputs.
Motion Type specifies zone motion for a rotating or translating reference frame or for a sliding zone in a sliding mesh problem. The default selection of Stationary indicates that the zone is not moving
Boundary condition
Pressure outlet boundary conditions are used to define the static pressure at flow outlets (and also other scalar variables, in case of backflow). The use of a pressure outlet boundary condition instead of an outflow condition often results in a better rate of convergence when backflow occurs during iteration.当有回流产生,压力出口比outflow在收敛速率上快。
Outflow boundary conditions are used to model flow exits where the details of the flow velocity and pressure are not known prior to在。。。之前,优先 solution of the flow problem. They are appropriate where the exit flow is close to a fully developed condition, as the outflow boundary condition assumes a zero streamwise gradient for all flow variables except pressure. They are not appropriate for compressible flow calculations.
Turbulent intensity
The turbulence intensity, I, is defined as the ratio of the root-mean-square of the velocity fluctuations, u , to the mean flow velocity, uavg
A turbulence intensity of 1% or less is generally considered low and turbulence intensities greater than 10% are considered high.
The turbulence intensity at the core核心 of a fully-developed duct输送管,导管 flow can be estimated from the following formula derived from an empirical correlation for pipe flows:
.
For fully-developed internal flows, choose the Intensity and Hydraulic Diameter specification
Fluent用户手册_电力/水利_工程科技_专业资料 暂无评价
FLUENT 6.3 使用手册_IT/计算机_专业资料。Fluent 6.3.26的相关帮助文档翻译过来的使用手册Fluent 6.3 使用手册 FLUENT 6.3 使用手册 B.Case 和 Data 文件...
TG(fluent使用手册)_电子/电路_工程科技_专业资料 暂无评价
如何使用该手册 根据你对 CFD 以及 FLUENT 公司的熟悉,你可以通过各种途径使用该手册 对于初学者,建议如下: 为了对 FLUENT 的计算能力以及启动方式有所了解,最好...
? ? ? ? ? 本手册介绍 FLUENT 的使用方法,并附带了相关的算例。下面是本教程各部分各章节的简略概括。 第一部分: 开始使用: 描述了 FLUENT 的计算能力以及...
注意:在 Fluent 使用手册中 "grid" 和 "mesh"是具有相同所指的两个单词 图一:基本程序结构 我们可以用 GAMBIT 产生所需的几何结构以及网格(如想了解得更多可以...
Fluent UDF 高级应用技术培训的应用实例 5.ANSYS FLUENT 14.5 Battery Module Manual ANSYS FLUENT 14.5官方用户手册 6.FLUENT湍流模拟教程(EN).pdf 阐述了FLUENT...
fluent-v6.3-lect-08b-user-defined-functions_工学_高等教育_教育专区。...编译 (详细内容请参阅FLUENT用户手册中的介绍) UDF 代码被一次性编译成机器语言...
,具体操作请参考 Fluent 用户手册。 34 在 FLUENT 的学习过程中,通常会涉及几个压力的概念,比如压力是相对 值还是绝对值?参考压力有何作用?如何设置和利用它? ...
Solve->Animate->Define...,具体操作请参考 Fluent 用户手册。 34 在 FLUENT 的学习过程中,通常会涉及几个压力的概念,比如压力是相对值还是绝对值?参考压力有 ...
热门文档