Comparison of TI Voice-Band CODECs for Telephony Applications
SLAA088
2.3.2
Features of Recommended TI VBAPs Table 6 contains a list of VBAPs and their features manufactured by TI. Note the low active power consumption of these devices, which makes them ideal for battery powered, wireless applications. Table 6. Voice Band Audio Processors (VBAPs) DEVICE PART NUMBER POWER SUPPLY 3V (±10%) 3V (±10%) 3V (±10%) 5V 3V 3V (±10%) POWER CONSUMPTION (Active/Pwr Down) 20 mW/2 mW (typ) 20 mW/2 mW (typ) 20 mW/ 2mW (typ) 40 mW/3 mW (typ) 33 mW/90µW (max) 19 mW/27µW (max at 2.7 V) RESOLUTION (Bits) Companded: 8 Linear: 13 Companded: 8 Linear: 13 Companded: 8 Linear: 13 Companded: 8 Linear: 13 Companded: 8 Linear: 13 Companded: 8 Linear: 15 MASTER CLOCK FREQUENCY 2.048 MHz 1.152 MHz 2.048 MHz 2.048 MHz 2.048 MHz 2.048 MHz SAMPLE RATE (Max) 16 kHz 16 kHz 16 kHz 16 kHz 8 kHz 8 kHz PASSBAND To 7.2 kHz To 7.2 kHz To 7.2 kHz To 7.2 kHz To 3.5 kHz To 3.5 kHz
TLV320AC36 (µ-law) TLV320AC37 (A-law) TLV320AC40 (µ-law) TLV320AC41 (A-law) TLV320AC56 (µ-law) TLV320AC57 (A-law) TCM320AC36 (µ-law) TCM320AC37 (A-law) TWL1101 (µ-law) TWL1103 (µ-law and A-law)
The TWL1101 and TWL1103 VBAPs use sigma-delta technology in the converters. The remaining devices use switched-capacitor technology. The TWL family of devices has both a data interface (PCM interface) and a control interface (I2C interface). The above VBAPs (excluding the AC40 and AC41) operate from a standard 2.048-MHz master clock to meet the requirements for U.S. Analog, U.S. Digital, CT2, DECT, GSM, and PCS Standards for Hand-Held Battery-Powered
Telephones. The TLV320AC40 and AC41 operate from a standard 1.152-MHz master clock to meet the requirements for DECT Standards for Hand-Held Battery-Powered Telephones.
2.3.3
Programmable Features of VBAPs The TLVxxx and TCMxxx VBAP devices have only one feature that is programmable, the volume control. This feature is only available when the device is operating in linear mode. The TWL family of devices has a small register set, accessed via the I2C bus interface. The following programmable features can be controlled via the I2C interface on the TWL family:
10
Transmit amplifier gain Receive amplifier gain Sidetone gain Volume control Earphone control (selection/mute) PLL powered up/down (TWL1101) Microphone selection/bias
Comparison of TI Voice-Band CODECs for Telephony Applications

video-on-demand, 3D gaming and video telephony....for developing handset UI and BREW applications ?...Go Online CHIPSET COMPARISON ONLINE TOOL Please ...
Comparison TeakLite-II Architecture Type Traditional,...(audio, voice, telephony) High performance, low ...codecs for full HD applications > SATA/SAS – ...
telephony and high-rate packet data applications. ...For comparison, the fixed rates of the AMR-WB ...narrowband codecs (e.g., EVRC and SMV [3, ...
and/or voice-messaging applications – that are...in-band signaling found in analog telephony to ...Comparison and optimization of packet loss repair ...
support for low bit rate and wideband codecs. ...DSP External Memory Interface Telephony Interface ...Voice Applications Services APIs to access DSP ...
for telephony (ITU) Variations in delay (jitter)...codecs: narrowband / wideband G.711, G.723.1A...applications 基于TI DSP软件应用架构设计的DSP软件,...
telephony equipment and save on consultants’ fees... and integrates with your network/applications ...//www.3cx.com/phone -system/editioncomparison....
voice codecs cannot be guaranteed to reproduce ...Some applications, such as gateways into the PSTN...Tones for telephony events are in the range of ...
comparison of the key issues in sessionbased ...voice, video, data, media applications, using IP... working in real-time, such as IP telephony ...
comparison of the key issues in sessionbased ...voice, video, data, media applications, using IP... working in real-time, such as IP telephony ...
热门文档