4.1.2 All material substitution requests shall be submitted by the contractor in writing to the Air Products engineer in a timely fashion that allows Air Products ample time for review before contract
award.
在合同授予之前,承包商必须及时用书面形式把所有的材料替代请求提交 APCI 工程师,以便
APCI有足够的时间进行审查。
4.1.3 The contractor shall furnish all materials required for temporary connection of the component
parts of the structural steel.
承包商必须提供临时连接钢结构组件所需的所有材料。
4.1.4 The contractor shall furnish all welding electrodes, temporary fit-up bolts if required, and drift pins
for erection of the structural steel.
承包商必须提供钢结构件安装时使用的所有焊条、临时装配螺栓(如果需要的话)和对准销。
4.2 Welding Electrodes
焊条
4.2.1 Welding electrodes for welding carbon steel shall be Series E70XX and shall be according to the
following specification of the American Welding Society:
焊接碳钢结构的焊条必须是E70XX系列产品,并且必须符合美国焊接协会的以下标准:
4.2.1.1 Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding, AWS A5.1.
保护金属电弧焊使用的碳钢标准AWS A5.1。
4.2.2 Welding electrodes for welding stainless steel and/or stainless to carbon steel shall be according
to the following specifications:
不锈钢焊接和/或不锈钢与碳钢焊接使用的焊条必须符合以下标准:
4.2.2.1 Specification for Stainless Steel Welding Electrodes for Shielded Metal Arc Welding, AWS A5.4.
保护金属电弧焊使用的不锈钢焊条标准Arc Welding, AWS A5.4.
4.2.2.2 Specification for Bare Stainless Steel Welding Electrodes and Rods, AWS A5.9.
裸不锈钢和焊条和焊丝标准AWS A5.9。
4.3 Concrete Anchors
混凝土地脚螺栓
4.3.1 Concrete anchors shall be HILTI HVA Adhesive Anchor System using standard HAS anchor rods and
HVU adhesive capsules of 3/8, 1/2, 5/8, 3/4, 7/8, 1 and 1 1/4 inch nominal diameter inclusive. Adhesive
anchors may be used in service temperatures up to 170°F. Anchors shall be carbon steel unless specifically indicated to be furnished in stainless steel on the drawings or in the bills of material. Carbon
steel shall be either hot-dip zinc-coated according to ASTM A 153/A 153M or zinc-plated according to
ASTM B 633 at the manufacturer's option. Anchors shall be installed to the minimum depth of
embedment as recommended by the manufacturer.
混凝土地脚螺栓必须是HILTI HVA粘合地脚螺栓系统,使用公称直径为3/8, 1/2, 5/8, 3/4, 7/8, 1 和1
1/4英寸的标准HAS螺杆和HVU粘合封套。沾合地脚螺栓的使用温度可达170°F。如果图纸上或材
料单上没有特别规定使用不锈钢,地脚螺栓必须是碳钢材质。碳钢材料必须按照ASTM A 153/A
153M标准热浸镀锌,或者按照ASTM B 633标准镀锌,制造厂可在二者中选择其一。地脚螺栓必
须按照制造厂家建议的最低埋设深度安装。
4.3.2 HILTI Kwik Bolt II Anchor System may be substituted for HILTI HVA adhesive anchors, in 1/4, 3/8, 1/2,
5/8, 3/4, and 1 inch nominal diameter inclusive with the written approval of the Air Products structural
engineer.
如果得到APCI 工程师的书面批准,HILTI Kwik Bolt II 地脚螺栓系统可以用来替代公称直径为1/4,
3/8, 1/2, 5/8, 3/4, 和1英寸的HILTI HVA粘合地脚螺栓。
Cold Galvanizing Compound
钢结构安装施工方案_建筑/土木_工程科技_专业资料。钢结构安装施工方案BSCC 上海宝钢工程建设总公司 联合车间吊装施工技术方案 吊装施工技术方案 1.工程概况 1.工程概...
钢结构安装要求_建筑/土木_工程科技_专业资料。钢结构安装要求钢结构的安装要求: (1)本工程的技术要求系钢结构制作并安装完毕后的最终要求, 不包括工艺余量及加工...
钢结构安装施工方案_建筑/土木_工程科技_专业资料。非常实用大为制氨有限公司 50 万吨年产合成氨项目煤气化装置钢结构 钢结构安装施工方案 1 工程概述 1.1 大为...
17.1 17.1.1 (1) 钢结构制作安装方案 工程概述 由于本工程的详细设计没有完成,根据我公司对此类工程的经验,本工程 钢结构主要是管架钢结构、工艺结构用钢...
钢结构安装施工方案_建筑/土木_工程科技_专业资料 暂无评价0人阅读0次下载举报文档 钢结构安装施工方案_建筑/土木_工程科技_专业资料。钢结构施工的组织设计...
钢结构安装记录_建筑/土木_工程科技_专业资料。SH3503J211 钢结构安装记录位 号 检查 点数 5 5 5 5 5 5 5 5 5 5 工程名称:30 万吨/年乙烯法 VCM 扩建项...
钢结构厂房安装协议依据《合同法》及相关法律、法规之规定,经甲乙双方自愿达成如下共识; 甲方: 乙方: 一、工程概述, 工程地址: 工程名称: 工程面积:约; 工程工...
钢构件安装施工方案 1 工艺流程 1.1.焊接操作工艺流程 焊接安全设施的准备、检查 安装材料 坡口检查 坡口检查记录 气象条件的记录 坡口表面的清理 局部预热 定位...
安装施工方案 中国化学工程第七建设有限公司 漳州腾龙芳烃(PX)项目部 4 漳州古蕾海腾码头投资管理有限公司 罐区管廊安装工程第Ⅱ标段(31~64 段) 钢结构制作安装...
钢结构吊装及安装施工方案_建筑/土木_工程科技_专业资料。【钢结构吊装及安装施工方案】 第一章 1.1、 钢结构设计图纸。 编制依据 1.2、《钢结构工程施工质量验...
热门文档