文档下载 文档下载导航
设为首页 | 加入收藏
搜索 请输入内容:  
 导航当前位置: 文档下载 > 所有分类 > 工程科技 > 交通运输 > A separation standard for departures transitioning from terminal to EN route control
侵权投诉

A separation standard for departures transitioning from terminal to EN route control

航路间隔标准

After initial divergence, 15 degrees continues to be the applicable divergence standard. All other forms of separation can be discontinued and divergence (or passing) separation can be applied when aircraft are on opposite/reciprocal courses and controllers have observed that aircraft have passed each other, or aircraft are on the same or crossing courses/assigned radar vectors and one aircraft has crossed the projected course of the other and the angular difference between their courses is at least 15 degrees [5].

In order for terminal controllers to provide passing and diverging separation, the aircraft tracks must be monitored to ensure that the target symbols will not touch. If passing and diverging or visual separation rules are not applied in the terminal area, a minimum of 3 miles separation must be ensured provided a single radar source is used.

En Route Divergence Standard

In en route airspace, Passing and Diverging rules permit vertical separation between two aircraft to be discontinued after aircraft have passed each other on opposite courses and certain other conditions are met. However, the terminal application of 15-degree divergence between same or crossing courses is not permitted. Except in the case of aircraft on passing opposite courses, visual separation being provided, and for an exception which is discussed in the next section, a minimum of 5 miles separation1 must be provided.

x the leading aircraft is and will remain faster than the following aircraft; and

x separation is constantly increasing and the first center controller will establish 5 NM or other appropriate form of separation prior to the aircraft departing the first center sector; and

x the procedure is covered by a Letter Of Agreement (LOA) between the facilities involved and limited to specified routes and/or sectors/positions

This separation standard is commonly referred to as transitional separation [5]. It should be noted that this procedure does not require that the diverging routes have a minimum of 15-degree divergence. Terminal area controllers cannot transfer the 15-degree divergence separation standard to en route controllers, they must establish a minimum of 3 miles separation prior to transferring control to the en route controller.

ATC Transfer of Control Responsibilities

ATC transfer of control responsibilities dictate that the controller transferring control to the receiving controller shall resolve all aircraft and airspace conflictions prior to transferring control and shall provide the appropriate separation required for the receiving controller.

The separation required by the receiving controller is often specified in a LOA between the transferring and receiving facilities and/or sectors. Often times a distance above the minimum separation criteria is specified in order to account for airspeed and performance differential concerns. For example, many en route facilities require terminal facilities to provide 7 to 8 NM spacing for aircraft being delivered on the same routes and more than 5 NM spacing for aircraft on adjacent or parallel routes. The inability to transfer the reduced separation requirements in the terminal area to the en route environment may result in operational inefficiencies for airspace users.

Transitional Separation Standard

An exception in en route separation minima is made, provided certain conditions are met, for aircraft transitioning from terminal to en route control. This exception serves as an intermediate step between the divergence and 3 mile separation rules permitted in the terminal area and the 5 mile minimum requirement in en route airspace. It permits terminal controllers to deliver departing aircraft to the en route controller with a minimum of 3 miles separation provided:

x the aircraft are on diverging routes/courses, and/or In certain instances 3 miles separation may be applied in en route airspace.

1

Proposed Standard Concepts

This section presents a new standard concept to transition aircraft from terminal to en route control. The standard capitalizes on improved navigational

上一页第2页

你可能喜欢

热门文档

相关文档

  • lec4

    {STARS) RWAV Standard lnstrument Departures (SI ...Terminal busy en route and 2erminal airs paw E ...Reduced Separation between Aircraft b Capacity 5. ...

  • ...Paths for RNP Aircraft in Busy Terminal Areas - ...

    where appropriate separation between successive ...Standard Terminal Arrival Routes (STARS) from the...If the departures have been waiting in a long ...

站点地图 | 文档上传 | 侵权投诉 | 手机版
本站所有资源均来自互联网,本站只负责收集和整理,均不承担任何法律责任,如有侵权等其它行为请联系我们.
文档下载 Copyright 2013 doc.guandang.net All Rights Reserved.  -  email