文档下载 文档下载导航
设为首页 | 加入收藏
搜索 请输入内容:  
 导航当前位置: 文档下载 > 所有分类 > 工程科技 > 交通运输 > Optimizing Flight Paths for RNP Aircraft in Busy Terminal Areas - First Step Towards 4-D Navigation
侵权投诉

Optimizing Flight Paths for RNP Aircraft in Busy Terminal Areas - First Step Towards 4-D Navigation

Optimizing Flight Paths for RNP Aircraft in Busy Terminal Areas - First Step Towards 4-D Navigation

OPTIMIZING FLIGHT PATHS FOR RNP AIRCRAFT IN BUSY TERMINAL

AREAS – FIRST STEP TOWARDS 4-D NAVIGATION

Dr. Satish C. Mohleji and Ronald K. Stevens, The MITRE Corporation Center for Advanced Aviation

System Development, McLean, VA

Abstract

The Next Generation Air Transportation System (NGATS) concepts, defined by the Joint Planning and Development Office (JPDO), consider 4-D navigation as one of the core elements. During intervals of heavy traffic, establishing and achieving 4-D operations for arrivals in busy

terminal areas will be a major challenge. This paper presents the development and demonstration of a decision support tool called Logical Expansion of Arrivals and Departures to Enhance RNP (Required Navigation Performance) (LEADER). This human-in-the-loop simulation tool (with controller, pilot and Traffic Management Coordinator (TMC) workstations) permits each aircraft, based on its capabilities, to fly desired 3-D flight paths (shortest flight paths with continuous descent) under varying wind conditions. A flexible terminal area route structure is developed that eliminates all traffic merge points prior to the traffic converging on to the final approaches. The design of the tool is based on minimizing the variations between the aircraft flight planning and actual operations by defining routes all the way to touchdown and establishing landing schedules using accurate flight time estimates and pair-wise wake vortex separations. Traffic under high density conditions at a major airport during Instrument Meteorological

Conditions (IMC) was simulated. The results show significant savings in distance traveled and flight times, as well as a reduction in air/ground communications that would provide reduced

operating costs for the users and lower workload for the operators. On an average, the flights saved 10.94 nmi in distance flown, 2 minutes and 16 seconds in flying time and reduced air/ground communications by 30 percent. Since the terminal areas involve most complex traffic patterns due to continuously climbing and descending flights, the tool offers a foundation and a first step towards realizing the future goal of using 4-D navigation from end to end in the entire National Airspace System (NAS).

Introduction

As often happens in busy terminal

maneuvering areas where the arrival paths to the runways are not generally well defined, and where navigation systems are not always available for guidance, the aircraft are maneuvered under ground control. In such situations, the controllers use ad hoc vectoring not only for separating aircraft, but also for guiding aircraft on the desired paths.

Although efforts are now underway to define Area Navigation (RNAV) routes to the runways as overlays, which enable equipped aircraft to self navigate from point to point, it is workload intensive for the controllers to efficiently merge aircraft from different directions using mixed

operating procedures. The airlines continue to press for route repeatability and improved schedule

predictability, while at the same time the air traffic controllers require procedures involving less

workload by enabling them to smoothly merge and separate aircraft with varying levels of equipage. With steadily increasing numbers of Flight Management System (FMS)/autopilot-coupled aircraft which are capable of flying Required Navigation Performance (RNP)-0.3 or better, not only could these aircraft fly very accurately their desired horizontal paths, but also they are capable of flying efficient Continuous Descent Approaches (CDA) from cruise altitudes to touchdown. During medium to heavy traffic conditions, the Air Traffic Control (ATC) constraints and ad hoc vectoring in the airspace surrounding the airports limit the ability of these aircraft to effectively use their

onboard avionics due to a lack of appropriate traffic planning. Without an automation planning and decision support tool, it is difficult to accurately predict arrival schedules that are essential for realizing end to-end benefits of RNP for the users flying optimum paths, and for the service providers to manage traffic with varying capabilities with minimum air/ground communications.

第1页

你可能喜欢

热门文档

站点地图 | 文档上传 | 侵权投诉 | 手机版
本站所有资源均来自互联网,本站只负责收集和整理,均不承担任何法律责任,如有侵权等其它行为请联系我们.
文档下载 Copyright 2013 doc.guandang.net All Rights Reserved.  -  email