ublox 软件编程手册

4.2 UBX
UBX protocol messages use two different numbering schemes. Many UBX messages (e.g. UBX-NAV-SVINFO)use a single byte for the satellite identifier (normally named "svId"). This uses similar numbering to the
"extended" NMEA scheme and is merely an extension of the scheme in use for previous generations of u-bloxreceivers.
With ever increasing numbers of GNSS satellites, this scheme will have to be phased out in future u-bloxreceivers (as numbers greater than 255 will become necessary). Consequently, newer messages use a moresophisticated, flexible and future-proof approach. This involves having a separate gnssId to identify which GNSStype the satellite is part of and a simple svId which indicates which number the satellite is in that system. Innearly all cases, this means that the "svId" is the natural number associated with the satellite. For example theGLONASS SV4 is identified as gnssId 6, svId 4, while the GPS SV4 is gnssId 0, svId 4.
GNSS IdentifiersgnssIdGNSS Type

01
5
6GPSSBASQZSSGLONASS
Other values will be added as support for other GNSS types is enabled in u-blox receivers.
GLONASS satellites can be tracked before they have been identified. In UBX messages, such
unknown satellite numbers are always reported with svId 255.
4.3 Summary
A summary of all the SV numbering schemes is provided in the following table.
Satellite numberingGNSS TypeSV rangeUBX gnssId:svIdUBX svIdNMEA (strict)

NMEA (extended)GPS
SBAS
QZSS
GLONASSG1-G32S120-S158Q1-Q5R1-R32, R?0:1-321:120-1585:1-56:1-32, 6:2551-32120-158193-19765-96, 2551-3233-64-65-96, null1-3233-64,152-158193-19765-96, null
5 SBAS Configuration Settings Description
5.1 SBAS (Satellite Based Augmentation Systems)
SBAS (Satellite Based Augmentation System) is an augmentation technology for GPS, which calculates GPSintegrity and correction data with RIMS (Ranging and Integrity Monitoring Stations) on the ground and usesgeostationary satellites to broadcast GPS integrity and correction data to GPS users. The correction data istransmitted on the GPS L1 frequency (1575.42 MHz), and therefore no additional receiver is required to makeuse of the correction and integrity data.
Currently, there are no operational augmentation systems for any GNSS other than GPS.
Consequently this section only addresses GPS.
135 NMEA, UBX Protocol Specification, u-blox 5 GNSS Receiver GPS.G5-X-07036-E Public Release Table of Contents Page ix Receiver Description Overview ...
Receiver Signal (B-) FIRST LVDS Receiver Signal ...V IN _ MAX V IN _ MIN Description LVDS ...9-7. Appropriate Condition for Public Display - ...
4. Product Description 4.1. Block Diagram MT7601 VCC(3.3V) SMPS 3.3V...Receiver RF Front End External antenna 2.412~2.4835GHz LED XTAL 40MHz ...
Source description V=2 P SC PT=SDES=202 SSRC/CSRC 1 SDES items ... ...(s) Receiver Report Receiver Report SSRC SSRC report block(s) 1 report ...
(串口)方式,输出的 GPS 定位数据采用 NMEA-0183 协议(默认) ,控制协议为 UBX 协议(该协议的详细介绍请看 u-blox6_ReceiverDescriptionProtocolSpec_GPS.G6-SW...
(该协议的详细介绍请看 u-blox6_ReceiverDescriptionProtocolSpec_GPS.G6-SW-...(2) 定位状态,A=有效定位,V=无效定位 (3) 纬度 ddmm.mmmmm(度分) (4)...
PUBLIC DISPLAY ITEM Page 1 2 3 4 5 6 6 8 ...Ground LVDS Receiver Signal(-) LVDS Receiver Signal...V IN _ MAX V IN _ MIN Description LVDS ...
PUBLIC DISPLAY ITEM Page 1 2 3 4 5 6 6 8 ...General Description The LC420WXN is a Color Active...Receiver Clock Signal(-) LVDS Receiver Clock ...
‘H’ Description SECOND LVDS Receiver Signal (A...3. (N<M) ※ G to G Spec is average of ...9-7. Appropriate Condition for Public Display - ...
Wangcs YG-309M-A DESCRIPTION : CSR8605 (ROM )Module REV : 1.0 CHECKED...LTD Receiver Performance (Temperature 25°C) Issue Date :2013-05-08 17--...
热门文档