Vibration characteristics analysis of a 20-high Sendzimir mill with localized defect on the working roller
25thInternationalCongressonConditionMonitoringandDiagnosticEngineeringJournalofPhysics:ConferenceSeries364(2012)012093IOPPublishingdoi:10.1088/1742-6596/364/1/012093
Although the generation of the local defect has been elaborated in the view of material microstructure,
the effects of the defect on the vibration response of the mill has not been presented [1,18,19].
In this paper, the vibration characteristics of a 20-high Sendzimir mill with localized defect on
the working roller is studied. The three-dimensional finite element model of the roll mill is established,
including the first intermediate rolls, the working rolls and the strip and the explicit dynamic finite
element method is used for calculation. Effects of the local defect on the vibration characteristics of
the roll mill and the surface quality of the strip steel are presented. The calculated results are compared
with experimental results and good agreement is obtained.
2. Model description
2.1. The working roller with local defect
Figure1 shows the shape and position of the localized defect on the working roll. The defect has the
shape of cube with a length L and a rectangular cross-section with width B and depth H. The distance
between the left end of the defect and the left end of the working roller is D. The parameters are
specified as L=50mm, B=23mm, H=5mm, D=100mm in this study. Table 1 shows the parameters of
the rollers and the working condition of a 20-high Sendzimir mill.

Figure 1. The shape and position of the localized defect on the working roll.
Table 1. Parameters of the rollers and the working condition.
Working roller Items Diameter /mm Length /mm
Speed /(r/min)
Diameter /mm
Length /mm
Rolling force /KN
Length /mm
Width /mm
Thick /mm
Tension /ton Amount 63.5 1440 3770.59 102 1578 2706 1000 1246 1.3 45.9 First intermediate roller Strip
2.2. Finite element modelling
Figure 2 shows the established finite element model for the dynamic analysis of the rolling process.
The first intermediate rollers, the working rollers and the strip are included for calculation. The second
Automation and Robotics INVESTIGATIONS ON DETECTION MODEL OF LARGE SCALE ROTATION SHAFT TORSIONAL VIBRATION IN PRECISION HEAVY MACHINERY Zhao Wu School of ...
Information for papermakers Technical Assistance, Service and Know-how Press Section 8 Reduction of vibration in presses by “swinging the seam” The ...
Shock&Vibration&Drop三个测试的介绍与区别_电子/电路_工程科技_专业资料。先做 Shock, Vib, Drop 三个测试的介绍, 然后来说说区别: 一. 机构测试基本分类 1...
refers to the motion of bodies as induced by external forces DYNAMICS & MECHANICAL VIBRATIONS Basic Concept Vibration is a mass which oscillates about ...
Vibration Test_英语学习_外语学习_教育专区。PACKAGING TEST METHOD TITLE: Vibration Test Released Date: Originating Department: TCS TM No: QMKA-PACKAGING ...
Forced vibration_理学_高等教育_教育专区。受迫振动实验Forced vibration Objectives 1. Familiar with how to use the torsion pendulum to test the laws of ...
?拉格朗日方程:定义拉格朗日密度函数 L=T-U 1 Engineering Vibration, Chapter 4 §4.1 直杆的纵向自由振动 通常假设原先垂直杆件中心线的横剖面,在杆件受载...
Vibration 实验听课笔记整理我们实验时的振动实验目前主要是模拟运输过程中载具的振动对产品的破坏性。 一般 电子产品自己是不会振动的,起振动来源为载具,如汽车、...
Vibration Monitoring System - Decription and Operation_机械/仪表_工程科技_专业资料。Vibration Monitoring System - Decription and Operation...
Vibration Test_机械/仪表_工程科技_专业资料 暂无评价0人阅读0次下载举报文档 Vibration Test_机械/仪表_工程科技_专业资料。 ...
热门文档