New memory materials will enable future 'untethered ' electronics Growing uneasiness over the ability to continue shrinking existing CMOS memory cells and the push toward portable electronics are helping to foster R&D on new memory technologies. There are
Semico Press: Featured in Solid State Technology September 2004
Growing uneasiness over the ability to continue shrinking existing CMOS memory cells and the push toward portable electronics are helping to foster R&D on new memory technologies.
There are two very different reasons for the interest in new memory devices. The first is growing concern over the ability to continue shrinking existing CMOS memory cells of dynamic random-access memory (DRAM), static RAM (SRAM), and flash. All of these devices retain information by storing charge in structures that consist of capacitors and transistors. As these structures shrink, the surface area available for capacitors is reduced, and the increasingly complex challenge of providing enough mass to store the charge is a concern for memory manufacturers. For SRAMs, the challenge is dealing with the growing probability of soft errors. Flash devices have their own impediments to storing multiple bits in each cell.
The rate of progress may be tightly coupled to advances in lithography. Regardless of whether a new memory
technology is based on magnetic properties, changes of resistance, or even the up/down position of nanotubes, the ultimate impact of the technology on DRAM, SRAM, and flash products will be governed by the ability to make smaller lines and cells.
There is a flaw, however, in assuming that the value of new memory materials is ultimately controlled by advances in lithography and Moore's law. This masks the true impact of new memory technologies. While the predictability of lithographic advances may affect the extendibility of DRAM or flash, the implications of new memory materials go beyond the usual objectives of faster/smaller/cheaper. Successfully achieving the design goals driving magnetoresistive RAM (MRAM), ferroelectric RAM (FeRAM), ovonic unified memory (OUM), programmable metallization cells (PMC), and other new technologies will result in drastic direction changes for semiconductor companies and will lead to unique processor architectures.
The second reason for high interest is the push toward portable electronics. In the early days of semiconductor production, Intel, Motorola, Texas Instruments, Mostek, and other companies were the leading memory manufacturers. At that time, fabrication facilities were expected to manufacture a wide variety of products. Logic and memory products were often fabricated in the same facility, albeit with certain changes in the manufacturing flow.
During the 64K DRAM product cycle, Japanese companies proposed a radical strategy of dedicating large facilities to producing only memory products, with the focus on DRAMs. The theory was that dedicated facilities could achieve lower manufacturing costs and higher yields than general-purpose facilities. The trade-off was that memory designs would have to minimize the logic on the die. The move represented a fundamental shift in manufacturing strategies, and was predicated on the growing demand for large memory arrays.
With the support of computer OEMs, standards organizations supported the new manufacturing strategy. That split between memory and logic processes continues today. The steep decline in the cost/bit of commodity memory served the market well as OEM products migrated from mainframes to minicomputers and, finally, to PCs. Architectures that continue to combine memory and logic now fall into the specialty domain of "embedded memory."
As the growth of desktop PCs has slowed, the driving force for new technologies has shifted toward smaller architectures. Nick Tredennick, editor of the Gilder Technology Report, differentiates between tethered devices that remain attached to their power and data sources, and untethered devices that carry their own storage media and power sources. The impetus for many semiconductor technologies has become the smaller form factors of untethered devices. One obvious embodiment of this new focus is the cellular handset.
solid-state by terahertz time-domain spectroscopy_... communications technology, global environmental ... shows at 27.4° while QH has a featured di...
solid-state by terahertz time-domain spectroscopy_... communications technology, global environmental ... shows at 27.4° while QH has a featured di...
热门文档