1674 Yuefan Liu et al. / Procedia Engineering 15 (2011) 1673 – 1677
easy to form a whole, easy to extend the principle of functional design. Thus PLC automatic control in the field of dairy processing has been widely used. The dairy business scene, often more harsh environmental conditions, PLC control system reliability directly affects the safety of dairy production enterprises and economic operation. Therefore, research on interference signals of PLC control system of, cause and suppression measures to improve the PLC control system for anti-interference capability and reliability is of great significance.
2. Common interference types and solutions
There are many reason can cause interference in the field. We need to find out the real root cause first. And then figure out the solutions.
2.1.Power interference
In the dairy processing filed, the switching surge, large-scale power equipment on and off, caused by AC and DC drives harmonics, short circuit transient shocks can form in the grid pulse interference. PLC's normal power supplied by the power supply network, It will directly affect the normal operation of PLC. As of the network scope, it will be all the space the electromagnetic interference caused by sustained high-frequency harmonic interference. Especially during disconnecting the power grid in particular in the inductive load transient voltage peak is produced by rating a few times, the pulse power will fully damage the PLC semiconductor devices. And because it contains a large number of harmonics, it goes through the semiconductor circuit of the distributed capacitance, insulation resistance and so on invasive logic circuit, causing malfunction. In order to suppress interference, maintaining voltage stability, we often use several anti-jamming methods:
Using isolation transformer attenuate high frequency interference signals which coming from line-in power twisted pair cable is used to suppress input/output common mode interference. The shield ground in different ways, the effects on the interference suppression are not the same. The general practice is the primary and secondary shields are grounded.
Wave filter Use filter instead of isolation transformer, to a certain frequency range, there are certain anti-network interference, but to choose a good filter frequency range is difficult. Therefore, common method is to use both and isolation transformer at the same time. Note that one side of isolation transformers and secondary cables use twisted pair, the first and second side should to be separated.
Separation of power supply system Separate PLC, I / O channels and other power supply equipment to suppress the grid disturbance. Each transformer secondary winding shield ground point should be access to the winding circuits, respectively, the choices necessary and appropriate public access site ground. Insulation for the PLC power supply transformer secondary side non-grounding. Also we can use power supply system and dual power supply system. Dual power source the best quote from a different substation.
2.2.The interference from the signal line
Control system is connected with all kinds of signal transmission lines, in addition to the effective transmission range of information but there will always be external interference signal intrusion. Detection of signal lines assume the transmission of signal and control signal task, the transmission quality directly affects the accuracy of the entire control system, stability and reliability. Interference on the signal lines, mainly from the electromagnetic radiation of space, there is differential mode
PLC系统设计及抗干扰研究_专业资料。随着PLC在自动化控制领域的普及,提高PLC控制系统的抗干扰能力显得十分重要。介绍了PLC的设计原则,并从硬件和软件的角度提出了抗...
PLC控制系统的抗干扰研究_专业资料。文章分析了工业现场的干扰来源,指出了抑制干扰措施在实际工程应用中的重要地位,有针对性地设计了PLC控制系统的硬件与软件抗干扰...
PLC控制系统的抗干扰研究PLC控制系统的抗干扰研究隐藏>> PLC 控制系统的抗干扰研究 1 概述 PLC 作为一种自动化程度高、配置灵活的工业生产过程控制装置,因为其...
PLC系统抗干扰的研究 着重介绍了PLC系统的组成、内部抗干扰措施以及在应用中的抗干扰方案。着重介绍了PLC系统的组成、内部抗干扰措施以及在应用中的抗干扰方案。...
PLC控制系统的抗干扰问题研究PLC控制系统的抗干扰问题研究隐藏>> 维普资讯 http://www.cqvip.com 科之 学友 Fnfieme rde ari cctseonAuS 27 9囝 0~0l0,E P...
7 ? PLC 控制系统的抗干扰研究熊幸明 ( 长沙大学电子系 ,湖南长沙 410003) [ 摘 要] 文中对影响 PLC 控制系统稳定性的主要干扰源 、 成因进行了分析 。从...
PLC抗干扰_信息与通信_工程科技_专业资料。PLC抗干扰PI.jC控制系统的 电源抗干扰问题研究李萍浙江水利水电专科学校机电系310018 使用隔离变压器加以隔离。这是由于...
PLC系统中的抗干扰问题研究_自然科学_专业资料 暂无评价
PLC系统应用中抗干扰问题分析_机械/仪表_工程科技_专业资料。PLC 系统应用中的抗干扰问题分析 【摘要】随着科学技术的发展,计算机技术的不断进步,出现 了很多有...
PLC控制系统抗干扰技术研究 阐述了PLC控制系统存在的主要干扰源,针对干扰源的不同途径,从硬件和软件两方面,阐述了电源抗干扰设计措施、输入输出电路抗干扰设计措施,...
热门文档