determine the vertical locations of punches, it is necessary to determine the relative position of each punch. The relative position of the rod should be determined by the contact point as seen in the side view shown in Fig. 4, since the punches’ spherical head will always contact the workpiece at a tangency point and not at a center point.
Fig. 4. Determining the relative contact position of punch’s head. Considering the contact configured

by the radius (r) of the punch head and the workpiece thickness (t), the stroke of the punch can be modified as shown in Fig. 4. Cai and Li [23] suggested a non-linear equation to calculate the contact points and the position coordinate of pressing punches for sheet forming. Their non-linear equation was selected for this present study and an incremental scheme was used to calculate the contact point. The incremental process can be summarized as follows:
1. Determining the location of the contact point of the punch head on the surface.
2. Calculating the normal vector at the contact point.
3. Calculating the surface function of the center of the punch heads.
The region of a punch head projecting onto a workpiece is discretized using dense points as shown inFig. 5. The location of the closest points is determined as the contact points after the distance between the points on the punch head and the projected point set are calculated.
Process design for multi... 暂无评价 6页 2.00元 Method of closed loop... Springback adjustment fo... 暂无评价 13页 免费 Enhancement of Increment.....
Multicore Bundle Adjustment-Manual_计算机软件及应用_IT/计算机_专业资料。三维计算机视觉匹配相关资料Multicore Bundle Adjustment Manual Changchang Wu University of...
Multi--scale Approach for CFRP Composite Simulation by JSTAMP-NV and DIGIMAT_材料科学_工程科技_专业资料。Multi-scale Approach for CFRP Composite Simulation...
for sheet metal part, multi-point forming (MPF) technology is discussed in...3.1 Element group design and shape adjusting mode Height adjustment for ...
216-219. ON MULTI-IMAGE RECONSTRUCTION FROM HISTORIC PHOTOGRAPHS I. ...Multi-image Adjustment of Historic Images of Unknown Orientation with the ...
However, there are no analytical models for variation analysis in multi-station compliant assembly systems. It is critical to develop realistic models for ...
Similar to freeways except inclusion of a few different adjustment factors to determine FFS ? Base conditions for multi-lane highways: – 12’ lanes – ...
Site design plane adjustment work is heavy, if modify the design elevation,...In modern construction engineering, general multi-storey buildings when the ...
热门文档