文档下载 文档下载导航
设为首页 | 加入收藏
搜索 请输入内容:  
 导航当前位置: 文档下载 > 所有分类 > 高等教育 > 工学 > 机械工程毕业设计外文翻译——自动化制造系统与PLC
侵权投诉

机械工程毕业设计外文翻译——自动化制造系统与PLC

机械工程毕业设计外文翻译——自动化制造系统与PLC

外文原文

Automating Manufacturing Systems with PLCs

2.1 INTRODUCTION

Control engineering has evolved over time. In the past humans were the main method for controlling a system. More recently electricity has been used for control and early electrical control was based on relays. These relays allow power to be switched on and off without a mechanical switch. It is common to use relays to make simple logical control decisions. The development of low cost computer has brought the most recent revolution,the Programmable Logic Controller (PLC). The advent of the PLC began in the1970s, and has become the most common choice for manufacturing controls.

PLCs have been gaining popularity on the factory floor and will probably remain predominant for some time to come. Most of this is because of the advantages they offer. Cost effective for controlling complex systems.

Flexible and can be reapplied to control other systems quickly and easily.

Computational abilities allow more sophisticated control.

Trouble shooting aids make programming easier and reduce downtime.

Reliable components make these likely to operate for years before failure.

2.1.1 Ladder logic

Ladder logic is the main programming method used for PLCs. As mentioned before, ladder logic has been developed to mimic relay logic. logic diagrams was a strategic one. By selecting ladder logic as the main programming method, the amount of retraining needed for engineers and trades people was greatly reduced.

Modern control systems still include relays, but these are rarely used for logic. A relay is a simple device that uses a magnetic field to control a switch, as pictured in Figure 2.1. When a voltage is applied to the input coil, the resulting current creates a magnetic field. The magnetic field pulls a metal switch (or reed) towards it and the contacts touch, closing the switch. The contact that closes when the coil is energized is called normally open. The

第1页

你可能喜欢

  • 模具设计外文翻译
  • 自动化外文文献
  • PLC控制英文翻译
  • 故障诊断技术
  • 毕业设计外文翻译
  • 英文翻译中文
  • 翻译论文

热门文档

相关文档

  • 自动化制造系统与PLC论文中英文资料外文翻译文献

    自动化制造系统与PLC论文中英文资料外文翻译文献_电力/水利_工程科技_专业资料。自动化制造系统与PLC论文中英文资料外文翻译文献中英文资料外文翻译文献 外文原文 Automa...

  • 基于PLC的自动化制造系统毕业论文中英文资料对照外文翻...

    基于PLC的自动化制造系统毕业论文中英文资料对照外文翻译文献综述_工学_高等教育_教育专区。基于PLC的自动化制造系统毕业论文中英文资料对照外文翻译文献综述附录...

  • 自动化外文翻译---自动化制造系统与PLC关系

    自动化制造系统与 PLC 关系 控制工程随着时间的演变。 过去的人们主要致力于控制...这些继电器使其可以在没有机械开关的情况下被开动 和关闭。这是通常使用继电器...

  • 机械设计制造及其自动化毕业设计外文翻译

    机械设计制造及其自动化毕业设计外文翻译_理学_高等教育_教育专区。机器人外文翻译机器人文章出处: 《机械制造专业英语》 主编:章跃 节选自第 21 课机器人 工业机器...

  • 数控专业外文翻译-自动化制造系统关于PLC

    数控专业外文翻译-自动化制造系统关于PLC_电力/水利_工程科技_专业资料。自动化制造系统关于 PLC 1 绪论 控制工程随着时间的演变。过去的人们主要致力于控制方面研究...

  • 关于PLC的毕业设计外文及翻译

    外文文献-自动化制造系统... 21页 免费 毕业设计外文资料翻译-应... 21页 ...从本质上讲,PLC 是一种用高度专业化语言编程的工业计算机,并继续受益 于计算机...

  • 机械工程毕业设计外文翻译---可视化的PLC程序使用XML

    毕业设计(论文)外文资料翻译 学院(系) :专姓学业: 名: 号: 0701010249 机械工程学院 机械工程及自动化 外文出处:Visualization of PLC program using XML 附件:...

  • 关于PLC的毕业设计外文翻译

    关于PLC的毕业设计外文翻... 21页 4下载券 PLC中英文翻译 8页 免费 T68卧式...集权过程控制相结合提高机械化已导致生产率的提高。在过程控制系统的投资对在提高...

  • 机械PLC外文翻译

    2014 届 毕业论文(设计)外文文献翻译 姓学年专 ...机械设计制造及其自动化 机械工程学院 卢兆信 系 (...3.PLC 相比其它控制系统可编程控制器是可适应一系列...

  • PLC毕业设计开题报告(含文献综述、外文翻译)

    PLC毕业设计开题报告(含文献综述、外文翻译)_工学_高等...机械 3 班 机械设计制造及其自动化 机械工程学院 ...PLC 控制系统,包括 PLC 硬件及程序设计,并设计触摸...

站点地图 | 文档上传 | 侵权投诉 | 手机版
本站所有资源均来自互联网,本站只负责收集和整理,均不承担任何法律责任,如有侵权等其它行为请联系我们.
文档下载 Copyright 2013 doc.guandang.net All Rights Reserved.  -  email