工科英语
1 Electric Devices
1.1 Resistors
Resistors restrict the flow of electric current[1].For example,a resistor is
placed in series with a light-emitting diode(LED) to limit the current passing through the LED.
1.1.1 Resistor Values
The Resistor Colour Code
Resistance is measured in ohm,the symbol for ohm is an omega Ω.1Ωis quite small,
so resistor values are often given in kΩ and MΩ.1 kΩ=1 000Ω;1 MΩ=1 000 000Ω.
Resistor values are normally shown using coloured bands.
number as shown in the Table 1.1.

[2] Each colour represents a Most resistors have 4 bands:
·The first band gives the first digit.
·The second band gives the second digit.
·The third band indicates the number of zeros.
·The fourth band is used to show the tolerance(precision) of the resistor,this may be ignored for almost all circuits but further details are given below.
The resistor in Figure 1.1 has red(2),violet(7),yellow(4 zeros) and gold bands.[3] So its value is 270 000Ω=270 kΩ.On circuit diagrams theΩis usually omitted and the value is written 270 k.
The standard colour code cannot show values of less than 10Ω.To show these small values two special colours are used for the third band:gold which means × 0.1 and silver which means × 0.01.The first and second bands represent the digits as normal.
For example:
Red,violet,gold bands represent 27× 0.1=2.7Ω.
Blue,green,silver bands represent 65× 0.01=0.65Ω.
Tolerance of Resistors(fourth band of colour code)
The tolerance of a resistor is shown by the fourth band of the colour code.Tolerance is the
precision of the resistor and it is given as a percentage.For example,a 390Ω resistor with a tolerance of ±10% will have a value within 10% of 390Ω,between 390-39=351Ω and 390+39=429Ω(39 is 10% of 390).
A special colour code is used for the fourth band tolerance:
Silver ±10%,gold ±5%,red ±2%,brown ±1%.
If no fourth band is shown the tolerance is ±20%.
Tolerance may be ignored for almost all circuits because precise resistor values are rarely
required.
Resistor Shorthand
Resistor values are often written on circuit diagrams using a code system which avoids
using a decimal point because it is easy to miss the small dot.Instead the letters R,K and M are used in place of the decimal point.To read the code:replace the letter with a decimal point,then
专业英语讲稿 隐藏>> 分享到: X 分享到: 使用一键分享,轻松赚取财富值, 了解详情 嵌入播放器: 普通尺寸(450*500pix) 较大尺寸(630*500pix) 预览复制 ...
专业英语讲稿-2006-lesson3-for-copy 英语学习英语学习隐藏>> UNIT 3 Step-Growth Polymerization Many different chemical reactions may be used to synthesize ...
英语演讲PPT 10页 免费 专业英语ppt演讲 18页 免费 英语演讲-电脑游戏(免费) 13页 免费 青春 英语演讲稿 13页 2财富值 英语演讲PPT-smile 14页 2财富值...
专业英语讲稿-2006-lesson7-8专业英语讲稿-2006-lesson7-8隐藏>> UNIT 22 Mechanical Properties of Polymers The mechanical properties of polymers are of ...
材料学专业英语讲稿 隐藏>> 材料科学与工程专业英语 PART 1 INTRODUCTION TO MATERIALSSCIENCEANDENGINEERING 材料科学与工程概论 UNIT1UNIT1 Materials Science and ...
专业英语演讲稿专业英语演讲稿隐藏>> Good morning! Ladies and gentlemen. Now I am standing here to give a report. The topic is Simulation of ...
专业英语讲稿_能源/化工_工程科技_专业资料。化工类专业英语翻译,课后习题专业英语课程讲稿 第一单元 化学与化学家没有化学,我们的生活将变得不可想象,因为化学在...
专业英语讲稿 好好学英语好好学英语隐藏>> Unit 1 Chemical Industry 化学工业 Before reading the text below, try to answer following question: 1. When did...
9 授课题目 专业英语翻译(三) 讲稿内容 授课时间 2014.03.19 备注 课堂引言 1.了解高分子材料的一些基本知识和相关术语 2.了解高分子材料的最新研究进展 3....
专业英语讲稿-2006-lesson6-copy 英语学习英语学习隐藏>> photosensitive polymer 光敏聚合物 photopolymer感光聚合物 photoluminescence polymer光致发光聚合物 ...
热门文档