等角挤压

Trans. Nonferrous Met. Soc. China 23(2013) 2021

2028
Equal channel angular extrusion of NiTi shape memory alloy tube
Shu-yong JIANG1, Ya-nan ZHAO1, Yan-qiu ZHANG1, Ming TANG1, Chun-feng LI2
1. Industrial Training Centre, Harbin Engineering University, Harbin 150001, China;
2. School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China
Received 12 June 2012; accepted 18 December 2012
Abstract: As a new attempt, equal channel angular extrusion (ECAE) of nickel titanium shape memory alloy (NiTi SMA) tube was investigated by means of process experiment, finite element method (FEM) and microscopy. NiTi SMA tube with the steel core in it was inserted into the steel can during ECAE of NiTi SMA tube. Based on rigid-viscoplastic FEM, multiple coupled boundary conditions and multiple constitutive models were used for finite element simulation of ECAE of NiTi SMA tube, where the effective stress field, the effective strain field and the velocity field were obtained. Finite element simulation results are in good accordance with the experimental ones. Finite element simulation results reveal that the velocity field shows the minimum value in the corner of NiTi SMA tube, where severe shear deformation occurs. Microstructural observation results reveal that severe plastic deformation leads to a certain grain orientation as well as occurrence of substructures in the grain interior and dynamic recovery occurs during ECAE of NiTi SMA tube. ECAE of NiTi SMA tube provides a new approach to manufacturing ultrafine-grained NiTi SMA tube. Key words: NiTi tube; shape memory alloy; equal channel angular extrusion; severe plastic deformation; finite element method
hardening and large elastic resilience. So far, the NiTi SMA tube has been mainly manufactured by the drawing 1 Introduction
processes, such as the hollow sinking, the fixed plug
drawing, the floating plug drawing, the deformable The remarkable attractiveness of nickel titanium
mandrel drawing and the non-deformable mandrel shape memory alloy (NiTi SMA) comes from its shape
drawing [9,10]. In addition to the drawing processes, the memory effect and superelasticity. Shape memory effect
extrusion process was also used to manufacture the NiTi of NiTi SMA refers to its ability to recover original shape
SMA tube [11]. when being heated to the temperature above the austenite
Microstructures of NiTi SMA have a significant finish temperature (Af) after experiencing a certain
influence on its shape memory effect as well as deformation in the martensitic phase. Superelasticity of
NiTi SMA refers to its nonlinear recoverable superelasticity. In particular, grain refinement contributes
to enhancing the functional properties and the deformation behavior at temperatures above Af, which is
attributed to the stress-induced martensitic mechanical properties of NiTi SMA. Severe plastic transformation under loading and the spontaneous deformation (SPD) plays a significant role in
microstructural refinement of NiTi SMA. As a SPD reversion of the transformation under unloading [1 4].
NiTi SMA tube possesses a lot of excellent technique, equal channel angular extrusion (ECAE) is of
great importance in refining the microstructures of NiTi characteristics, such as kink resistance, crush resistance,
SMA by means of large shear plastic strain. VALIEV et flexibility, large recoverable deformation, high plateau
al [12,13] caused the microstructures of NiTi SMA to be stress and ultimate tensile strength, high potential energy
storage capability, high fatigue life, outstanding refined down to 250 nm by means of ECAE and found
that ECAE contributes to enhancing the yield strength, superelastic behavior at or around the body temperature,
so it has been one of the best candidates for the ultimate tensile strength, recoverable strain and
maximum reaction stress. KOCKAR et al [14] biomedical instruments so far [5 8]. However, NiTi
obtained ultrafine-grained NiTi SMA with the average SMA tube is difficult to process because of high strain
Foundation item: Project (51071056) supported by the National Natural Science Foundation of China; Projects (HEUCF121712, HEUCF201317002)
supported by the Fundamental Research Funds for the Central Universities of China
Corresponding author: Shu-yong JIANG; Tel: +86-451-82519706; E-mail: jiangshy@sina.com DOI: 10.1016/S1003-6326(13)62691-6

在等通道转角挤压过程中 ,镍钛 形状 记忆 合金管内部装 有钢 芯,然后将其封装在钢套中 。基于 刚粘塑 性有 限元法 ,镍钛形状记忆合 金管等通 道转 角...
4251. [12] [2] [13] [3] [14] [4] [15] [5] [16] [6] [17] [7] [18] [8] 镍钛形状记忆合金管的等通道转角挤压江树勇 1,赵亚楠 1,张...
CuZnAl形状记忆合金等通道转角挤压工艺的研究 研究了Cu-25.04Zn-3.83Al-0.2Zr形状记忆合金的ECAP过程以及不同温度挤压后组织和性能的变化。结果表明:在200℃...
等通道转角挤压FeMnSiCrNiC形状记忆合金时效过程中碳化物析出的研究_专业资料。研究了等通道转角挤压后时效处理对FeMnSiCrNiC合金碳化物的析出和形状记忆效应的影响。结果...
退火温度对等通道转角挤压态铁基形状记忆合金力学性能的影响 研究了退火温度对等通道转角挤压(ECAP)Fe17.80Mn4.73Si7.80Cr4.12Ni合金力学性能及显微组织的影响。...
退火温度对等通道转角挤压态铁基形状记忆合金力学性能的影响张 伟 ,李宁 ,文玉华... 相变热滞大和价格 便宜等特点 ,在一次性连接紧固元件 ,特别是管接头中 有着...
TB2钛合金等通道转角挤压变形过程的应变分析及实验研究_专业资料。运用有限元方法对TB2钛合金等温等通道转角挤压过程进行有限元模拟及实验研究。模拟结果表明,材料变形...
Ti-6Al-4V钛合金等通道转角挤压有限元模拟_专业资料。对Ti-6Al-4V钛合金的等通道转角挤压过程进行三维有限元模拟,分析不同的凸模下压速度对等通道转角挤压过程的...
等通道转角挤压(ECAP)工艺的研究现状_材料科学_工程科技_专业资料。维普资讯 ... 镍、 铁等 多种 合金 中获得 了超 细 晶粒组 织 ¨ .被证实是 一种 ...
热门文档