文档下载 文档下载导航
设为首页 | 加入收藏
搜索 请输入内容:  
 导航当前位置: 文档下载 > 所有分类 > 工程科技 > 能源/化工 > A Unified Model of Matrix Permeability in Shale Gas Formations
侵权投诉

A Unified Model of Matrix Permeability in Shale Gas Formations

A Unified Model of Matrix Permeability in Shale Gas Formations (Non-Darcy Flow, Adsorption Layer and Geomechanics)

Citation Export:

Wang, H. and Marongiu-Porcu, M. 2015. A Unified Model of Matrix Permeability in Shale Gas Formations. Paper SPE 173196 presented at the SPE Reservoir Simulation Symposium, held in Houston, Texas, USA, 23-25

doc.guandang.net

SPE 173196

A Unified Model of Matrix Permeability in Shale Gas Formations

HanYi Wang, SPE, University of Texas at Austin, and Matteo Marongiu-Porcu, SPE, Schlumberger

Copyright 2015, Society of Petroleum Engineers

This paper was prepared for presentation at the SPE Reservoir Simulation Symposium held in Houston, Texas, USA, 23–25 February 2015.

This paper was selected for presentation by an SPE program committee following review of information contained in an abstract submitted by the author(s). Contents of the paper have not been reviewed by the Society of Petroleum Engineers and are subject to correction by the author(s). The material does not necessarily reflect any position of the Society of Petroleum Engineers, its officers, or members. Electronic reproduction, distribution, or storage of any part of this paper without the written consent of the Society of Petroleum Engineers is prohibited. Permission to reproduce in print is restricted to an abstract of not more than 300 words; illustrations may not be copied. The abstract must contain conspicuous acknowledgment of SPE copyright. Abstract

Permeability is one of the most fundamental reservoir rocks properties required for modeling hydrocarbon production. Many shale gas and ultralow permeability tight gas reservoirs can have matrix permeability values in the range of tens to hundreds of nanodarcies. The ultrafine pore structure of these rocks can cause violation of the basic assumptions behind Darcy’s law. Depending on a combination of pressure-temperature (P-T) conditions, pore structure and gas properties, non-Darcy flow mechanisms such as Knudsen diffusion and/or gas-slippage effects will impact the apparent matrix permeability. Even though numerous correlations have been developed for apparent permeability enhancement in nanopore structures, they don’t correctly capture the changes in pore-structure geometry induced by stress variations and the release of attached gas molecules during production. The assumption of constant pore radius is valid under steady-state flow, however, within these ranges of ultralow permeability, transient and pseudo steady-state flow dominate the entire production life. With constant decreasing pore pressure and increasing effective stress, the formation microstructure will be affected, which may lead to decrease in matrix permeability. In this study, we propose a unified model for matrix permeability in shale gas formations, which for the first time considers all the competing phenomena that impact the non-Darcy flow in the nanopore structure, as well as the gas adsorption layer and compaction effects during production, coherently integrated into a single model. An unconventional, fully coupled hydraulically fractured shale gas production simulator was developed to investigate how different shale matrix permeability models can affect the long-term production forecast in a hydraulically fractured reservoir. The results of this study indicate the apparent permeability in the shale formation matrix is determined by the intrinsic permeability of nanopore structures and the non-Darcy flow mechanism. The intrinsic permeability can be altered by two competitive mechanisms, the increase in effective stress and the release of adsorbed molecules during production. The Non-Darcy flow phenomena are mostly controlled by the pressure decline and pore radius. The influence of geomechanical effects can temporarily dominate matrix apparent permeability during production, but with negligible impact on long-term production performance. The pore radius is the most critical parameter that controls the influence of non-Darcy flow, geomechanical effects and adsorption layer on shale matrix permeability. Formation permeability measured at laboratory conditions need to be correlated to reservoir conditions cautiously because the influence of non-Darcy flow, adsorption layer and geomechanical effects will greatly affect simulation results and production forecast. Even though the existence of stimulated (sheared or re-opened) natural fractures in a given shale, stimulated reservoir volume (SRV) provides the primary conductive paths for fluid flow, the alteration of matrix permeability during production will still impact long-term production performance.

Introduction

In classic fluid flow mechanics where continuum theory holds, fluid velocity is assumed to be zero at the pore wall (Sherman, 1969). This is a valid assumption for conventional reservoirs having pore radii in the range of 1 to 100 micrometer, because fluids flow as a continuous medium. Correspondingly, Darcy’s equation, which models pressure-driven viscous flow, works properly for such reservoirs. However, in shale reservoirs, which have pore throat radii in the range of 1 to 200 nanometers, fluid continuum theory breaks down and gas molecules follow a somewhat random path while still maintaining a general flow direction governed by pressure gradient. Molecules strike against the pore walls and tend to slip at pore walls instead of having zero velocity (Sherman, 1969). Although these phenomena can be modeled accurately using molecular physics, this is not practical for modeling flow of natural gas through shale reservoirs, which requires intensive computation that falls

A Unified Model of Matrix Permeability in Shale Gas Formations

beyond

第1页

你可能喜欢

热门文档

相关文档

  • Fractured shale-gas systems

    shale formations and improving their gas ...matrix-permeability shale reservoir is a controlling...The Devonian Shale Speci?c Log model of GTI (...

  • Evaluation_of_Shale_Gas

    Evaluation of Shale Gas Reservoirs Rick Lewis Oklahoma City Gas Shales What ...formations Mineralogy Faults and fractures Organic richness Matrix Permeability ...

  • 7BJShaleGasFracbakerhughes公司页岩气技术03

    Sh l t i ll h a Shale typically has permeability of .001 md 0.000001...what is happening in hard to model formations Baker/BJ 17 100 000 / - ...

  • 页岩气

    Carter's ‘constant leakoff’ model was later refined by Williams [2] who...matrix permeability in the tight gas shale formations, natural fractures ...

  • 页岩气介绍(A guide to shale gas 2011)

    The very low permeability of the rock causes the... extent and thickness of many shale formations. ...The amount of gas held in the matrix is ...

  • Shale gas

    Shale gas is natural gas that is found trapped within shale formations. ...Shale has low matrix permeability, so gas production in commercial quantities...

  • ...formation parameters of low permeability gas res...

    New method of calculating formation parameters of low permeability gas reservoir_专业资料。Ma.09Vlme3NoSrl.6 r20,ou ,.ei 1)3(aNo JunlfnryadPwe niergIS...

  • Improved Rock-Physics Model for Shale Gas Reservoirs

    heterogeneity, low matrix porosity and permeability, and in some cases, ... model helps to improve our understanding of various shale-gas formations. ...

  • Barnett Shale gas production

    shale (which has the lowest matrix permeability ...formations, which are commonly not only the ...Thus, any depositional model that can predict ...

  • Shale Gas Reservoirs

    nature of shale formations, and the gas within....Rock matrix porosity is linked with organic ...permeability with hydraulic fracturing - which is ...

站点地图 | 文档上传 | 侵权投诉 | 手机版
本站所有资源均来自互联网,本站只负责收集和整理,均不承担任何法律责任,如有侵权等其它行为请联系我们.
文档下载 Copyright 2013 doc.guandang.net All Rights Reserved.  -  email