Chinese J. Chem. Eng., 14(6) 784-789
(2006)
Application of the FactSage to Predict the Ash Melting Behavior in Reducing Conditions* LI Hanxu($%&)a***, Yoshihiko Ninomiya( 5$f%B)b, DONG Zhongbing( 3 ZHANG Mingxu(%h ! fi)' a
A)" and
Department of Chemical Engineering, Anhui University of Science and Technology, Huainan 232001, China Department of Applied Chemistry, Chubu University, Kasugai, Aichi 487-8501, Japan Department of Material Science and Engineering, Anhui University of Science and Technology, Huainan 232001, China
Abstract FactSage has been used to predict the ash behavior and ash fusion temperature (AFT) at high temperature under reducing atmosphere conditions. For Huainan coal ash samples, it has demonstrated a good agreement between the liquid phase formation as the function of temperature and the tested AFT. The tested and predicted flow for two typical Huainan coal ashes with the addition of CaO flux are quite fit with the maximum temperature (FT) temperature difference less than 74°C which is within acceptable range. It can be concluded that FactSage in combination with X-ray diffraction (XRD) can be used to predict the reactions occurring between minerals, as well as the mineral transformation and slag formation. This is probably an improved way to interpret melting properties of mineral matter in coal and assist in quantifying slag formation in gasifier operation. Keywords ash fusion temperature, FactSage, ash transformation, Huainan coals
1 INTRODUCTION The coal ash related problems are major concern to man coal companies and electrical power utiliThe formation of slagging and fouling deposits in combustion, agglomeration in fluidized beds, ash slag flow in integrated gasification combined cycle (IGCC) and other slagging reactors are directly related to the formation of liquid slag and to the stabilities of solid crystalline phase^'^'^]. The traditional methods used to characterize the high temperature ash behavior of the coal are becoming increasingly outdated and are unable to accurately predict the behavior of ash and slag in coal and coal blends in combustion and gasification techn~logies'~-'~~. Progresses in chemical thermodynamic and viscosity models of oxide systems, the development of computational methods, computer software and hardware now make it possible to accurately predict the phase equilibrium conditions in complex multi-component coal ash slag systems[ 14,151. Recently, studies on the prediction of ash fusion temperature (AFT) were undertaken with the aid of computer thermodynamic m~ d e l"~ -~ FactSage'201~]. was introduced in 2001 and was developed jointly by both the FACT-Win/F*A*C*T and ChemSage/ SOLGASMIX thermochemical packages that were founded over 28 years ago. The FactSage package consists of a series of information, database, calculation and manipulation modules that enable one to access and manipulate pure substances and solution databases. FactSage is an extremely powerful tool with Rec
eived 2005-09-01, accepted 2006-01-08. Huainan (2003001).
which one can perform a wide range of thermochemical calculations useful to chemical and physical metallurgists, chemical engineers, inorganic chemists, geochemists, electrochemists, environmentalists, etc. It provides information on the phases formed, their proportions and compositions, the activities of individual chemical components and the thermodynamic properties for all compositions, pressures and temperatures. Having a significant impact on coal selection internationally (e.g. CRIEPI, ECN-Energy Research Centre of the Netherlands, EERC-North Dakota Energy& Environmental Research Center, Hongik University in South Korea, Chubu University Japan), FactSage is already being used in the design of step-change technologies in the evaluation and selection of coal for entrained flow coal gasification and blast furnace iron making by research teams in the world. The most important features of the FactSage system are the large evaluated multi-component solution databases giving the thermodynamic properties as functions of temperature and composition. FactSage contains databases for 15-component oxide/glass solutions, ceramic solution such as spinels, solid and liquid salt solution, metallic alloy solutions and aqueous solutions, etc. Each of these databases has been prepared by critical evaluation and optimization of all available data using appropriate solution models. In order to understand the ash behavior of Huainan coals, the FactSage Thermodynamics Model (Factsage 5.1) was used to evaluate the liquid phase
* Supported by the Natural Science Foundation of the Education Ministry of Anhui Province (2004kj125) and the Key Project of ** To whom correspondence should be addressed. E-mail: hxli@aust,edu.cn

Chem. Eng., 14(6) 784—789 (2006) Application of the FactSage to Predict the Ash Melting Behavior in Reducing Conditions* LI Hanxu(李寒旭)a,**, ...
ago.The FactSage package preparedbycriticalevaluationand optimization ofa11 ...Application oftheFactSagetoPredicttheAshMeltingBehaviorinReducingConditionsAsshown...
melting point and viscosity of slag in steelmaking...the distribution behavior of P2O5 between solid solution...(2) The calculated results by FactSage indicat...
The computer software package FactSage was used to...These models predict the AFTs of coal ash ...ers), the content of the strongly reducing gas ...
热门文档