文档下载 文档下载导航
设为首页 | 加入收藏
搜索 请输入内容:  
 导航当前位置: 文档下载 > 所有分类 > 工程科技 > 能源/化工 > surfactant controlled switching of water-in-oil wetting behaviour of porous silica films grown at oi
侵权投诉

surfactant controlled switching of water-in-oil wetting behaviour of porous silica films grown at oi

表面活性剂在油田的应用

642 Manish M Kulkarni et al

the pore sizes (> 100 nm) of the silica films prepared here. Hence the rate of diffusion through the silica film should be similar for both CTAB and SDS. Therefore, one of the possible reasons for selective diffusion could be the fact that silica has terminal –OH groups on its internal pore surface.14 The ani-onic head group of SDS may interact with silica sur-face and get adsorbed on it strongly as compared to CTAB. This can be further facilitated by the very 1 CMC aqueous CTAB solution placed on the silica film, with pure water as the sub-phase, contact angle increased from 10 to 140° in 80 min. This discrep-ancy in the rate of change of contact angle indicates that the surfactant diffusion from drop to sub-phase is slow when there is large amount surfactant ad-sorbed on the silica film initially. We also found that diffusion rate of cationic CTAB was much faster compared to the anionic SDS surfactant, indicating high surface area of these films due to the three-dimensional porous network of the silica clusters, hin-dering further diffusion of SDS molecules through the porous film. The contact angle switching beha-viour shown here was persistent for at least three different cycles of sub-phase and droplet replace-ments, which indicates that the surfactant adsorbs strongly on the silica surface. Although the mecha-nisms of the difference in switching of contact angle after the CTAB and SDS adsorption need to be in-vestigated further, these results indicate that the sil-ica films grown here can be used for the control of wetting characteristics by surfactant diffusion. 4. Conclusion

A method to control wetting properties of a porous silica film grown and stabilized at a flat, macroscopic heptane–water interface (with water as the sub-phase) has been described. On changing the concen-tration of the dissolved surfactant in the aqueous sub-phase, the wetting characteristics of the porous film could be altered in a partial reversible manner. Such a switching of wetting characteristics takes place due to diffusion of the surfactant; it can be ei-ther from the aqueous sub-phase to a water drop placed on the heptane side of the film, or in the re-verse direction, depending on the concentration gra-dient of the surfactant across the film. For a pure water drop placed on the silica film and the aqueous sub-phase replaced by five times the critical micellar concentration (CMC) of a cationic surfactant (CTAB), the contact angle decreased from 140o to 16° in 25 min. This is because of diffusion of CTAB from sub-phase to the water drop and its adsorption at the water drop-oil interface. For surfactant diffusion in the reverse direction (i.e. from the water drop to the sub-phase), the two cases examined by changing the drop history gave similar reversibility in wetting transition: (i) if the surfactant sub-phase was replaced back by pure water, the contact angle increased from 16° to 90° in 2 h, and (ii) for a fresh drop containing

selectivity of the porous silica film towards diffu-sion of CTAB. Thus, the porous silica film can pos-sibly be used as a membrane for selective surfactant diffusion. The results presented have implications in oil–water separation and microfluidic devices. Acknowledgements

AS acknowledges the support of the Department of Science and Technology (DST) through its grants to the Unit on Nanosciences at Indian Institute of Tech-nology (IIT), Kanpur and an IRHPA project. It is a pleasure to be a part of the Festschrift honouring Professor C N R Rao whose life and works have been a constant source of inspiration to us. References

1. Starov V M, Zhdanov S A, Kosvintsev S R, Sobolev V D and Velarde M G 2003 Adv. Coll. Inter. Sci. 104 123

2. Maiti R N, Khanna R, Sen P K and Nigam K D P 2004 Chem. Engg. Sci. 59 2817

3. Khanna R and Nigam K D P 2002 Chem. Engg. Sci. 57 3401

4. Danino D and Marmur A 1994 J. Colloid Interface Sci. 166 245

5. Pezron I, Bourgain G and Quere D 1995 J. Colloid Interface Sci. 173 319

6. Verheijen H J J and Prins M W J 1999 Langmuir 15 6616

7. Xia F, Feng L, Wang S, Sun T, Song W, Jiang W and Jiang L 2006 Adv. Mater. 18 432

8. Rao C N R, Kulkarni G U, Thomas P J, Agrawal V V and Saravanan P 2003 J. Phys. Chem. B107 7391

9. Rao C N R, Kulkarni G U, Agrawal V V, Gautam U K, Ghosh M and Tumkurkar U 2005 J. Colloid Inter-face Sci. 289 305

Faget L, Berman A and Regev O 2001 Thin Solid

Films 386 6

Kumar S M and Deshpande A P 2006 Colloids and

Surfaces A Physicochem. Eng. Aspects 277 157

Cabral J T and Hudson S D 2006 Lab on a Chip 6 427 Geerken M J, Lammertink R G H and Wessling M

2007 Colloids and Surfaces A: Physicochem. Eng. Aspects 292 224

10.11.12.13.

上一页第6页

你可能喜欢

热门文档

相关文档

站点地图 | 文档上传 | 侵权投诉 | 手机版
本站所有资源均来自互联网,本站只负责收集和整理,均不承担任何法律责任,如有侵权等其它行为请联系我们.
文档下载 Copyright 2013 doc.guandang.net All Rights Reserved.  -  email