Yttria doped nanocrystalline zirconia powder was prepared by spray-pyrolysis technique. Powder crystallized into tetragonal form, as dense and compositionally homogeneous polycrystalline spheres. X-Ray diffraction (XRD) and high resolution transmission ele
Image Anal Stereol 2001;20:157-161Original Research Paper
DOMAIN SIZE DISTRIBUTION OF Y-TZP NANO-PARTICLES USINGXRD AND HRTEM
FLORENCE BOULC'H1, MARIE-CLAUDE SCHOULER2, PATRICIA DONNADIEU2, JEAN-MARCCHAIX2 AND ELISABETH DJURADO1
1
Laboratoire d’Electrochimie et de Physico-Chimie des Matériaux et des Interfaces (LEPMI), 2Laboratoire deThermodynamique et Physico-Chimie Métallurgiques (LTPCM), BP 75- 38402 Saint Martin d’Hères, Francee-mail: Florence.Boulch@lepmi.inpg.fr(Accepted August 27, 2001)
ABSTRACT
Yttria doped nanocrystalline zirconia powder was prepared by spray-pyrolysis technique. Powder crystallizedinto tetragonal form, as dense and compositionally homogeneous polycrystalline spheres. X-Ray diffraction(XRD) and high resolution transmission electron microscopy (HRTEM) have been used in order tocharacterize the mean size and the size distribution of crystalline domains. An average size of 6 nm wascalculated by Scherrer formula from X-Ray diffraction pattern. The domain size, determined by analysismethod developed by Hytch from HRTEM observations, ranges from 5 to 22 nm with a main populationaround the value 12 nm. Limits and complementary nature of XRD and HRTEM methods are discussed.Keywords: HRTEM, image analysis, phase image, tetragonal zirconia, XRD.
INTRODUCTION
Yttria doped nanocrystalline zirconia (Y-TetragonalZirconia Polycrystals – referred to as 2.5Y2O3-ZrO2) –is considered a potential candidate to be used aselectrolyte in solid oxide fuel cells, due to itsremarkable mechanical and thermal properties,compared to the cubic form, used up to now. Thestudy of Y-TZP electrical properties is in progress(Boulc’h et al., 2001.) in order to compare electricalperformance of tetragonal and cubic forms.
The high temperature, tetragonal form zirconia(ZrO2) can be stabilized at room temperatureprovided a nanometric crystalline domain size ismaintained (Djurado et al., 2000) and/or differentoxides such as rare-earth oxides are added (Tsukumaet al., 1984). Unfortunately, metastable tetragonalphase may transform in the monoclinic form (t→m).Now, monoclinic zirconia presents low ionicconductivity and can not be viewed as electrolyte forsolid oxide fuel cells. Therefore, the parametersinfluencing the t→m transformation are to be studied.On one hand, in undoped nanocrystalline zirconia, themartensitic t→m transformation was observed up to acritical size, evaluated to 25 nm (Djurado et al., 2000).On the other hand, depending on the crystallinedomain size distribution, the t→m transformationoccurs abruptly or continuously. Therefore, the final
aim of the study is to correlate yttria doped andundoped nanocrystalline zirconia behaviors towardsthe martensitic transformation, in terms of size andsize distribution. In a first time, X-Ray diffraction(XRD) and high resolution transmission electronmicroscopy (HRTEM) methods were used in order tomeasure the crystalline domains size and sizedistribution of 2.5Y2O3-ZrO2 powder.
The point of the present work is to present bothmethods and take benefits of their complementarynature in order to characterize the 2.5Y2O3-ZrO2powder.
MATERIALS AND METHODS
(ZrO2)0.975(Y2O3)0.025 – referred to hereafter as2.5Y2O3-ZrO2 – powder was synthesized by thespray-pyrolysis technique using an ultrasonicatomizer (Djurado and Meunier, 1998). The precursorsolution was made up of a stoichiometric mixture ofzirconyl nitrate hydrate (ZrO(NO3)2, Aldrich) andyttrium nitrate (Y(NO3)3, Aldrich) in distilled water.The concentration was 2.5*10-2 mol. L-1. The solutionwas atomized by a 1.7 MHz high-frequency ultrasonicmist generator. The gaseous N2+O2 mixture carriedthe aerosol at 6 L min-1 through a tubular furnace(Carbolite TZF – 60 mm in diameter and 1090 mm in
particles was calculated to be around 21 nm ...(BJH) pore size distribution plot (inset) of ...Using the BJH method and the desorption branch ...
by XRD, UV-vis, IR, DLS, TEM, and HRTEM. ...improve the homogeneity of the copper particles. ...size distribution may be further improved by ...
investigated by XRD, SEM, TEM, HRTEM, and EDS...size and improved the distribution of sintering ...nanostructured silica particles using high-energy ...
domain, such materials have been shown to ...of nano-sized Nd hydride, ferro-boron, and ...size distribution, with most particles being about...
prepared from TiO2 particles treated with KOH ...of tubular materials with narrow size distribution....XRD and HRTEM results suggest that nano?bers ...
of Mesoporous CeO2 Nano- and Microstructures ...size distribution and another broad peak in the ...and spindle-like particles using a onestep procedure...
Soil Using Zero Valent Iron Nano-Particles ...Its degradation in soil is well known and ...Hydrodynamic particle size distribution of iron ...
Toxicity of nano- and micro-sized ZnO particles in human (1)_生物学_自然...and XRD, respectively ZnO (nm) Size and distribution nm (mean ± SD) 70...
various dendritic metal and alloys nano/microstructures...particles with a desired morphology, size, phase,...size distribution of the dendrites (Figure 1g). ...
c) SEM and d) HRTEM images of TiO2–SnO2 ...peak of SnO2, nano-SnO2 particles and the nanocrystallites...we determined the pore-size distribution and...
热门文档