文档下载 文档下载导航
设为首页 | 加入收藏
搜索 请输入内容:  
 导航当前位置: 文档下载 > 所有分类 > Design of high efficiency solar cells by photoluminescence studies
侵权投诉

Design of high efficiency solar cells by photoluminescence studies

DESIGN OF HIGH EFFICIENCY SOLAR CELLS BY PHOTOLUMINESCENCE STUDIES R. K. Ahrenkiel, D. J. Dunlavy and B. M. Keyes Solar Energy Research Institute(SER1) Golden, Colorado 80401 and S. M. Vernon, S. P. Tobin and T. M. Dixon Spire Corporation Bedford, MA 01730

ABSTRACT

A metal-organic chemical vapor deposition (MOCVD) AI,Gal -,As passivated GaAs single junction solar cell with AM1.5 efficiency of 24.8% was recently reported. Growth process research was greatly expedited by complementary time-resolved photoluminescence measurements on double heterostructures. The latter simulated the active regions of the solar cell and produced values of the minority carrier lifetime and interface recombination velocity of the components of the solar cell. Photon recycling was shown to be a significant process in the effective lifetime of the various structures. Interface recombination was found to limit the lifetime in materials grown at temperatures below 740°C. INTRODUCTION

been optimized, a working device model is developed using the measured parameters. By working with a device model that incorporates measured parameters, the device can be designed on the computer to produce the maximum power output for the given solar spectrum.

CONTACT

-=

THICKNESS

FROM WINDOW-

t

AR COATING 300 A

( P - A~ pao 2 A~ ) m i m R

3x1018

p-GaAs

/ 1.5 x IO1’

0.66 microns

n-GaAs BASE

4.0 microns

The design of single junction, high efficiency Ill-V solar cells is one of the goals of the national photovoltaics (PV) program. There are two primary activities associated with the task of designing the best possible device with the available materials technology. 1) Develop the processing technology such that the electrical parameters of the component materials are optimized for photovoltaic devices. 2) Design an optimized device based on modeling with the best available materials parameters. Process development for photovoltaic devices is directed toward the maximization of the minority carrier lifetime and diffusion length and the minimization of the recombination velocities of the various heterointerfaces. Process development may include varying the growth temperature, starting materials, and other components of materials fabrication. An important component of process development is the measurement of the key materials parameters such as minority carrier lifetime. For the Ill-V high efficiency program, the materials processing research involves the growth of a complex structure of hete roe pitaxial Iaye rs. Here we will describe the development of an AI,Gal.,As (x= 0.80) passivated GaAs p+/n single junction solar cell with an AI,Gal-,As(x= 0.30) back surface field. These devices were grown at the Spire Corporation. After the materials processing has

1X1Ol8 BSF

n-AI Ga As 03 07

1.0 micron

BUFFER LAYER

1x1018 GaAs

1.0 micron

SUBSTRATE

n+Ga/s

500 microns

BACK CONTACT

SPIRE SINGLE JUNCTIONSOLAR CELL 24.0% AMI

Figure 1: Schematic diagram of the Spire high-eff

iciency GaAs single junction solar cell.

PROCESS DEVELOPMENT PHILOSOPHY

A schematic of the Spire photovoltaic device is shown in Fig. 1. Recent devices1 have been measured at SERl with an efficiency of 24.8% at AM1.5. The materials development strategy was to grow diagnostic devices that simulate the various

432 0160-8371/90/0000-0432

’$1.00 1990 IEEE

Design of high efficiency solar cells by photoluminescence studies

第1页

你可能喜欢

热门文档

相关文档

站点地图 | 文档上传 | 侵权投诉 | 手机版
本站所有资源均来自互联网,本站只负责收集和整理,均不承担任何法律责任,如有侵权等其它行为请联系我们.
文档下载 Copyright 2013 doc.guandang.net All Rights Reserved.  -  email