MAX3420 -usb资料
USB Peripheral Controller
with SPI Interface
General Description
Features
The MAX3420E contains the digital logic and analog
circuitry necessary to implement a full-speed USB Microprocessor-Independent USB Solutionperipheral compliant to USB specification rev 2.0. A Complies with USB Specification Revision 2.0built-in full-speed transceiver features ±15kV ESD pro-(Full-Speed Operation)tection and programmable USB connect and discon-nect. An internal serial-interface engine (SIE) handles Integrated Full-Speed USB Transceiverlow-level USB protocol details such as error checking Firmware/Hardware Control of an Internal D+and bus retries. The MAX3420E operates using a regis-Pullup Resistorter set accessed by an SPI interface that operates upto 26MHz. Any SPI master (microprocessor, ASIC, DSP, Programmable 3- or 4-Wire 26MHz SPI Interfaceetc.) can add USB functionality using the simple 3- or Level Translators and VLInput Allow Independent4-wire SPI interface.
System Interface VoltageInternal level translators allow the SPI interface to run ata system voltage between 1.71V and 3.6V. USB timed Internal Comparator Detects VBUS for operations are done inside the MAX3420E with inter-Self-Powered Applications
rupts provided at completion so an SPI master does not ESD Protection on D+, D-, and VBCOMP
need timers to meet USB timing requirements. The Interrupt Output Pin (Level or ProgrammableMAX3420E includes four general-purpose inputs andEdge)Allows Polled or Interrupt-Driven SPIoutputs so any microprocessor that uses I/O pins toimplement the SPI interface can reclaim the I/O pinsInterface
and gain additional ones.
Intelligent USB Serial-Interface Engine (SIE)
The MAX3420E operates over the extended -40°C toAutomatically Handles USB Flow Control and+85°C temperature range and is available in a 32-pinDouble Buffering
LQFP package (7mm x 7mm) and a space-saving 24-Handles Low-Level USB Signaling Detailspin TQFN package (4mm x 4mm).
Contains Timers for USB Time-SensitiveApplications
OperationsSo SPI Master Does Not Need toTime Events
Cell PhonesPLCs
Built-In Endpoint FIFOs
PC Peripherals
Set-Top BoxesEP0: CONTROL (64 Bytes)
Microprocessors andPDAs
DSPs
EP1: OUT, Bulk or Interrupt, 2 x 64 Bytes MP3 Players(Double-Buffered)
Custom USB DevicesInstrumentation

Cameras
EP2: IN, Bulk or Interrupt, 2 x 64 Bytes (Double-Buffered)
Desktop Routers
EP3: IN, Bulk or Interrupt (64 Bytes) Double-Buffered Data Endpoints IncreaseThroughput by Allowing the SPI Master to
Transfer Data Concurrently with USB TransfersOver the Same Endpoint SETUP Data Has Its Own 8-Byte FIFO, SimplifyingFirmware Four General-Purpose Inputs and Four General-Purpose Outputs Space-Saving LQFP and TQFN Packages
SPI is a trademark of Motorola, Inc.
+Denotes lead-free package.
*EP = Exposed paddle, connected to ground.
________________________________________________________________Maxim Integrated Products
1

For pricing, delivery, and ordering information,please contact Maxim Directat 1-888-629-4642,or visit Maxim’s website at doc.guandang.net.
MAX3420E
Connect load capacitors (20pF max) to ground on both XI and XO. XI can also be driven with an external 12MHz ±0.25% clock. If driving XI with...
Connect load capacitors (20pF max) to ground on both XI and XO. XI can also be driven with an external 12MHz ±0.25% clock. If driving XI with...
热门文档