文档下载 文档下载导航
设为首页 | 加入收藏
搜索 请输入内容:  
 导航当前位置: 文档下载 > 所有分类 > 工程科技 > 材料科学 > Nanostructured Reduced Graphene Oxide=Fe2O3 Composite As a High-Anode for Lithium Ion Batteries
侵权投诉

Nanostructured Reduced Graphene Oxide=Fe2O3 Composite As a High-Anode for Lithium Ion Batteries

ARTICLE

Nanostructured Reduced Graphene Oxide/Fe2O3 Composite As a High-Performance Anode Material for Lithium Ion Batteries Xianjun Zhu, , Yanwu Zhu, Shanthi Murali, Meryl D. Stoller, and Rodney S. Ruoff ,*

College of Chemistry, Central China Normal University, 152 Luoyu Road, Hubei, Wuhan 430079, People's Republic of China, and Department of Mechanical Engineering and the Texas Materials Institute, The University of Texas at Austin, Austin, Texas 78712, United States

echargeable Li-ion batteries are considered as the leading candidates for hybrid, plug-in hybrid, and all electronic vehicles. Graphite has been employed as standard anode material in Li-ion batteries because lithium can be inserted/deinserted during discharging and charging, resulting in a theoretical speci c capacity of 372 mAh/g.1 In order to meet the increasing demand for higher energy density batteries, it is essential to develop electrodes made from durable, nontoxic, and inexpensive materials with a high charge/discharge rate and a high reversible capacity. Transition metal oxides such as Co3O4, MoO3, and Fe3O4 are capable of Liþ insertion/extraction in excess of 6 Liþ per formula unit,2À5 resulting in a signi cantly larger reversible capacity than that of commercial graphite. During cycling of Liþ insertion/deinsertion, transition metal oxides typically break into small metal clusters because they can react with Li to form Li2O, leading to a large volume expansion and a destruction of the structure upon electrochemical cycling, especially at high rates, thus resulting in severe loss of capacity with cycling and a poor electrical conductivity.6,7 Nanostructured metal oxide electrode materials have been used to improve the reversible capacity and rate capacity, which can be attributed to shortened Liþ insertion/extraction pathways.6,8 Various carbon additives have also been mixed with the metal oxide particles to improve their conductivity.9 Among the metal oxides used for Li-ion batteries, Fe2O3 is an abundant, low cost, and nontoxic material and is therefore considered as one of the most promising candidate materials.10,11 On the other hand, graphene has an excellent electronic conductivity, a high theoretical surface area of ZHU ET AL.

R

ABSTRACT Reduced graphene oxide/Fe2O3 composite was prepared using a facile two-step

synthesis by homogeneous precipitation and subsequent reduction of the G-O with hydrazine under microwave irradiation to yield reduced graphene oxide (RG-O) platelets decorated with Fe2O3 nanoparticles. As an anode material for Li-ion batteries, the RG-O/Fe2O3 composite exhibited discharge and charge capacities of 1693 and 1227 mAh/g, respectively, normalized to the mass of Fe2O3 in the composite (and~1355 and 982 mAh/g, respectively, based on the total mass of the composite), with good cycling performance and rate capability. Characterization shows that the Fe2O3 nanoparticles are uniformly distributed on the surfa

ce of the RG-O platelets in the composite. The total speci c capacity of RG-O/Fe2O3 is higher than the sum of pure RG-O and nanoparticle Fe2O3, indicating a positive synergistic e ect of RG-O and Fe2O3 on the improvement of electrochemical performance. The synthesis approach presents a promising route for a large-scale production of RG-O platelet/metal oxide nanoparticle composites as electrode materials for Li-ion batteries. KEYWORDS: reduced graphene oxide . Fe2O3 . anode . lithium ion battery . homogeneous precipitation

2630 m2/g, and excellent mechanical properties and, thus, is a promising component for high-performance electrode materials.12À15 Recently, chemically modi ed graphene materials have been used to form hybrid materials with SnO2, TiO2, and Mn3O4 in attempts to improve electrode capacity and cycling stability.16À18 However, to our best knowledge, an anode combining Fe2O3 with graphene-based materials for Liþ batteries has not been reported. Herein, we report a facile two-step synthesis of a“graphene”-Fe2O3 composite by homogeneous precipitation of FeCl3 in a suspension of graphene oxide (G-O) platelets with urea, with subsequent reduction of the G-O with hydrazine under microwave irradiation to yield reduced graphene oxide (RG-O) platelets decorated with Fe2O3 nanoparticles. As an anode material for Li-ion batteries, the RG-O/Fe2O3 composite exhibited discharge and charge capacities of VOL. 5 ’

* Address correspondence to r.ruo @mail.utexas.edu. Received for review February 7, 2011 and accepted March 28, 2011. Published online March 28, 2011 10.1021/nn200493r C 2011 American Chemical Society

NO. 4

’

3333–3338

’

2011 doc.guandang.net

3333

Nanostructured Reduced Graphene Oxide=Fe2O3 Composite As a High-Anode for Lithium Ion Batteries

第1页

你可能喜欢

热门文档

相关文档

站点地图 | 文档上传 | 侵权投诉 | 手机版
本站所有资源均来自互联网,本站只负责收集和整理,均不承担任何法律责任,如有侵权等其它行为请联系我们.
文档下载 Copyright 2013 doc.guandang.net All Rights Reserved.  -  email