31 62 00 - Driven Piles
d. e. f.
2.
Pile extensions will not be measured separately for payment, but will be included in the measurement of furnishing the pile. Splices will not be measured separately for payment.
Rejected piles will not be measured separately for payment. Extracted rejected piles shall become the property of the Contractor and shall be removed from the site.
Pre-drilling will not be measured separately for payment, but will be included in the measurement of driving the pile.
Payment: Driven piles will be paid for at the indicated Contract unit prices for the computed quantities as determined by the measurement method specified in Article 1.02.C.1.
1.03 DEFINITIONS A. Indicator Pile: An individual pile that is tested and observed to determine its behavior
during driving.
B. Test Pile: An individual pile which is tested and observed under static axial compression or
tension load, under lateral load, and under dynamic load tests.
C. Reaction Pile: An individual pile that provides the reaction load required to perform the
load test on a test pile. During this process the reaction pile can be subjected to either an axial compression load or an axial tension load, or lateral load.
D. Production Piles: Piles that are purchased and delivered for incorporation in the permanent
structure.
1.04 REFERENCES A. American Society for Testing and Materials (ASTM):
1. ASTM A36 Specification for Structural Steel
2. ASTM A252 Specification for Welded and Seamless Steel Pipe Piles
3. ASTM A444 Specification for Steel Sheet, Zinc-Coated (Galvanized) by the
Hot-Dip Process for Storm Sewer and Drainage Pipe
4. ASTM A690 Specification for High-Strength Low-Alloy Steel H-Piles and
Sheet Piling for Use in Marine Environments
5. ASTM A760 Specification for Corrugated Steel, Pipe, Metallic-Coated for
Sewers and Drains
6. ASTM A806 Specification for Steel Sheet, Aluminum-Zinc Alloy Coated
by the Hot-Dip Process for Storm Sewer and Drainage Pipe
7.
ASTM D1143 Method of Testing Piles Under Static Axial Compressive Load
UFGS 31 62 1616 Steel H Piles_建筑/土木_工程科技_专业资料。UFGS 31 62...No reduction in price is required for piles driven shorter than the ...
driven piles 打入桩 bored piles 钻孔桩 jacked-down piles 静压桩 screw piles 螺旋桩 hydraulic jack 液压桩 312.Piles foundations 桩基础 concrete pile 混凝土...
Driven Precast Piles – Balmore Glasgow ? Diaphragm walls - Bulgari Hotel Knightsbridge / Crossrail Stations Opportunities For Crossrail 1km of Diaphragm Wall ...
For some reason, the team leader was driven by a strong force to go ...The whole team worked together; carefully they removed the piles of ruined ...
Development of residual forces in long driven piles in weathered soils[J]. Journal of Geotechnical and Geoenvironmental Engineering, 2007, 133(10): 1216?...
Grouped foundations include groups of caissons, driven piles, drilled shafts,...[61,62] FHWA [57] Load test [47] [57] [57] [85] Load test [47...
Intheconventionalallowableofpile stress designapproachfordriven piles,thesafetyfactorishighlydependentfactors on theaccuracy be撕ngaa capacitydeterminationmethods....
- cased bore piles with casing driven directly through rotary head or ...5 37.0 41.0 50.0 58.0 62.0 46.0 51.5 62.0 72.0 77.0 5,7...
2.1 钻孔灌浆钢管桩 之所以将”drilled and grouted piles”译作 打入桩(grouted driven piles)两种新型桩形式, 油平台建设过程中,直径约1 m的桩在穿过约8 m ...
[edit] Pile foundation systems Foundations relying on driven piles often have groups of piles connected by a pile cap (a large concrete block into which...
热门文档