文档下载 文档下载导航
设为首页 | 加入收藏
搜索 请输入内容:  
 导航当前位置: 文档下载 > 所有分类 > 工程科技 > 电子/电路 > HD-SDI应用文档(三)
侵权投诉

HD-SDI应用文档(三)

HD-SDI应用文档(三)芯片资料

LMH0046

20182609

OPERATING SERIAL DATA RATES

This device operates at serial data rates of 143 Mbps, 270Mbps, 1483 Mbps and 1485 Mbps. The device does not lockto harmonics of these rates. The device does not lock andautomatically enters the reclocker bypass mode for the fol-lowing data rates: 177 Mbps, 360 Mbps, and 540 Mbps.SERIAL DATA CLOCK/SERIAL DATA 2 OUTPUT

The Serial Data Clock/Serial Data 2 Output is controlled bythe SCO_EN input and provides either a second retimed se-rial data output or a low jitter differential clock output appro-priate to the serial data rate being processed. When operatingas a serial clock output, the rising edge of the clock will bepositioned within the corresponding serial data bit intervalwithin 10% of the center of the data interval.

Differential output SCO/SDO2 functions as the second serialdata output when the SCO_EN input is a logic-low level. Thisoutput functions as the serial data-rate clock output when theSCO_EN input is a logic-high level. The SCO_EN input hasan internal pull-down device and the default state of SCO_ENis low (serial data output 2 enabled). SCO/SDO2 is mutedmode is activated and this output is functioning as a serialclock output, the output will also be muted.

The device will reclock this data without harmonic locking.Auto-Rate Detect mode may be used for any supported datarate, including DVB-ASI.

TABLE 1. Data Rate Select Input Codes

Rate [1:0]Code

00

Data Rateor ModeAuto-RateDetectmode270 Mbps1483/1485Mbps

Comments

143 Mbps rate operationsupported only in ARD modeMay be used to support DVB-ASI operation

0110

LOCK DETECT

The Lock Detect (LD) output, when high, indicates that datais being received and the PLL is locked. LD may be connectedno data signal is being received. See Table 2.

outputs. It may be connected to Lock Detect or externallyto LD, then the data and clock outputs are muted when thePLL is not locked. This function overrides the Bypass function:see Table 2the output by default.

to output the data without reclocking it. When this input is low,the device automatically bypasses the reclocking functionwhen the device is in an unlocked condition or the detecteddata rate is a rate which the device does not support. SeeTable 2device.

Control Inputs and IndicatorOutputs

SERIAL DATA RATE SELECTOR

The Serial Data Rate Selector (RATE [1:0]) permits the userto fix the operating serial data rate. The pins have internal pull-downs which maintain a logic-low input condition unless ex-ternally driven to a logic-high condition. This input also servesto place the device in a test mode. The codes shown inTable 1 select the desired operating serial data rate. TheLMH0046 then enters either the Auto-Rate Detect mode or asingle operating rate. Selecting the 270 Mbps rate mode mayalso be used when reclocking DVB-ASI data. DVB-ASI datais MPEG2 coded data that is transmitted in 8B10B coding.

doc.guandang.net

上一页第8页

你可能喜欢

热门文档

相关文档

站点地图 | 文档上传 | 侵权投诉 | 手机版
本站所有资源均来自互联网,本站只负责收集和整理,均不承担任何法律责任,如有侵权等其它行为请联系我们.
文档下载 Copyright 2013 doc.guandang.net All Rights Reserved.  -  email