文档下载 文档下载导航
设为首页 | 加入收藏
搜索 请输入内容:  
 导航当前位置: 文档下载 > 所有分类 > 工程科技 > 电子/电路 > HD-SDI应用文档(三)
侵权投诉

HD-SDI应用文档(三)

HD-SDI应用文档(三)芯片资料

HD-SDI应用文档(三)

LMH0046

Device Description

The LMH0046 HD/SD SDI Reclocker is used in many typesof digital video signal processing equipment. Supported serialdigital video standards are SMPTE 259M (A & C) and SMPTE292M. Corresponding serial data rates are 143 Mbps, 270Mbps, 1.483 Gbps and 1.485 Gbps. DVB-ASI data at 270Mbps may also be retimed. The LMH0046 retimes the serialdata stream to suppress accumulated jitter. It provides twolow-jitter, differential, serial data outputs. The second outputmay be selected to output either serial data or a low-jitter se-rial data-rate clock. Controls and indicators are: serial data-rate clock or second serial data output select, manual rateselect input, SD/HD rate output, lock detect output, auto/man-ual data bypass and output mute.

Serial data inputs are CML and LVPECL compatible. Serialdata and data-rate clock outputs are differential CML andproduce LVPECL compatible levels. The output buffer designcan drive AC or DC-coupled, terminated 100 differentialloads. The differential output level is 800 mVP-P ±10% into100 AC or DC-coupled differential loads. Logic inputs andoutputs are LVCMOS compatible.

The device package is a TSSOP20 with an exposed die at-tach pad. The exposed die attach pad is electrically connect-ed to device ground (VEE) and is the negative electricalterminal for the device. This terminal must be connected tothe negative power supply or circuit ground.

Serial Data Inputs, Serial Data andClock Outputs

SERIAL DATA INPUT AND OUTPUTS

The differential serial data input, SDI, accepts serial digitalvideo data at the rates specified in Table 1. The serial data

input is differential LVPECL compatible. The input is intendedto be DC interfaced to devices such as the LMH0034 adaptivecable equalizer. The input is not internally terminated or bi-ased. The input may be AC-coupled if a suitable input biasvoltage is provided. Figure 1 shows the equivalent input circuitThe LMH0046 has two, retimed, differential, serial data out-puts, SDO and SCO/SDO2. These outputs provide low jitter,differential, retimed data to devices such as the LMH0002cable driver or the LMH0031 deserializer. Output SCO/SDO2is multiplexed and can provide either a second serial dataoutput or a serial data-rate clock output. Figure 2 shows theThe SCO_EN input controls the operating mode for the SCO/SDO2 output. When the SCO_EN input is high the SCO/SDO2 output provides a serial data-rate clock. WhenSCO_EN is low, the SCO/SDO2 output provides retimed se-rial data.

Both differential serial data outputs, SDO and SCO/SDO2,SDO2 also mutes when the Bypass mode is activated whenthis output is operating as the serial clock output. When mut-differential output levels. The CML serial data outputs are dif-ferential LVPECL compatible. These outputs have internal50 pull-ups and are suitable for driving AC or DC-coupled,100 center-tapped, AC grounded or 100 un-center-tapped, differentially terminated networks.

20182608

7doc.guandang.net

上一页第7页

你可能喜欢

热门文档

相关文档

站点地图 | 文档上传 | 侵权投诉 | 手机版
本站所有资源均来自互联网,本站只负责收集和整理,均不承担任何法律责任,如有侵权等其它行为请联系我们.
文档下载 Copyright 2013 doc.guandang.net All Rights Reserved.  -  email