No. 7.1.30
Instructions A pressure at least equal to the rated working pressure of the preventer shall be applied and held below the closed ram or annular packing unit for a time period of not less than 10 minutes after stabilization. Variable bore rams shall be tested on the minimum and the maximum sizes for their range. Each blow out prevente
r equipped with a hydraulic ram locking system shall be pressure tested with the locking system engaged. The preventer shall be tested in accordance with API Spec 16 A chapter 7.5.8.7.1.3.1. and 7.5.8.7.1.3.2. after the rams are closed, the locks engaged and then all operating pressure(s) released.
Comments and recorded values
Standards and instructions API Spec 16A chapter 7.5.8.7.1.3.2 API Spec 16A chapter 7.5.8.7.3 API Spec 16A chapter 7.5.8.7.5
Rig's
7.1.31 7.1.32
Material requirements Metallic parts 7.1.33 A written manual specification shall be required for all metallic pressure containing or pressure controlling parts. The manufacturer's written specified requirements for metallic materials shall define the following; a. Material composition with tolerance b. Material qualification c. Allowable melting practice(s) d. Forming practice(s) e. Heat treatment procedure including cycle type time and temperature with tolerances, heat treatment equipment and cooling media f. NDE requirements g.Mechanical property requirements API Spec 16A chapter 5.2.1
Non-metallic parts 7.1.34 Each manufacturer shall have written specifications for all elastomeric materials used in the production of drill through equipment. These specifications shall include the following physical test limits for acceptance and control: a. Hardness per ASTM D2240 or D1415 b. Normal stress-strain properties per ASTM D412 or D1414 c. Compression per ASTM D395 or D1414 d. Immersion test per ASTM D471 0r D1414 All repair welding shall be done in accordance with the manufacturer's written specification. All major repair welds performed subsequent to original heat treatment shall be mapped API Spec 16A chapter 5.2.2
Weld Repairs 7.1.35 API Spec 16A chapter 6.2.3.1
© ModuSpec Engineering (INT) BV
API Spec 16A
Page 5 of 9

API Spec 16A/ISO13533 Drill-through Equipment API Spec 16C Choke and ...BOP 控制装置、立管系统、压力容器、电气系统和设备、提 升系统和设备是否根据...
API SPEC 16A A 01 DEC 1997 Specification for Drill Through Equipment Second Edition API SPEC 16C A 1993 Specification for Choke and Kill Systems API ...
API Spec 16A/ISO13533 Drill-through Equipment API Spec 16C Choke and ...(6)用于 BOP 应急控制的蓄电池包括安装、布置以及设置部位的详细情况;包括充电 ...
Spec Q1/ISO TS 29001 Spec 4F Spec 5CT/ISO11960 ANSI/API Spec 5DP Spec... and Pumping Tees Specification for Pumping Units Drill Through Equipment / ...
API Monogram Program Product Specifications API Spec 1B API Spec 2B API ...Drill Through Equipment – Rotating Control Devices Subsea Wellhead and ...
API Spec 7 Rotary Drill Stem Elements 1998_能源/化工_工程科技_专业资料。API Spec 7 Rotary Drill Stem Elements 1998今日推荐 ...
1, October 2000 API Spec 8C API Spec 9A API Spec 16A API Spec 16C ... Specification for Wire Rope Specification for Drill Through Equipment, (...
热门文档