ALE3D模拟慢烤

FIGURE 10. The initial mesh configuration with a 1.0 mm gap (green) between the LX-10 (red) and the steel (blue). The gap between the HE and steel is treated using a material model.
FIGURE 11. At a heating rate of 2oC/hour time the slide surface gap (green), initially 1 mm,
between the HE (red) and steel (blue) has been
1.reduced to 0.15 mm at 65 hours (Twall= 155 C).CONCLUSIONS
2.Progress has been made towards a predictive model for slow cookoff tests. Numerical procedures have been developed to model the thermal, mechanical, and chemical behavior during
the slow heating, transition, and explosive phases in
3.a single simulation. In this paper, we have demonstrated our capability to model dynamic gaps between high explosive surfaces and metal interfaces, using implicit hydrodynamics. . We have calculated slow cookoff heating (2 C/hr) for the
case where LX-10 is encased in steel, with a large
4.
(1.0 mm) or small gap (0.2 mm) between the high explosive and the steel. We have successfully implemented an implicit hydrodynamics numerical method that uses either a mixed material method or slide surfaces to treat the gap. In both cases we are able to calculate the closing of the gap by thermal expansion and chemistry of making gaseous products from the reacting high explosive. We are able to follow multiple phases of the HMXchemistry. These techniques will allow us to evaluate a large number of safety scenarios, involving high explosives encased by heated metal

surfaces with intervening gaps.
FIGURE 12. The hoop strain of the steel during the slow heating is identical for both slide surface and material methods with an initial gap of 0.2 mm
……….
REFERENCES
1. A. L. Nichols III, A. Anderson, R. Neely, and B. Wallin, Proceedings Twelfth International Detonation Symposium, Office of Naval Research, Arlington, Virginia, ONR 333-05-2, 94, 2005.
2. J. L. Maienschein and J. F. Wardell, “The Scaled Thermal Explosion Experiment”, Proceedings Twelfth International Detonation Symposium, Office of Naval Research, Arlington, Virginia, ONR 333-05-2, 94, 2005.
3. M. A. McClelland, J. L. Mainschein and A. L. Nichols, Joint DoD/DOE Munitions Technology Development Program FY-01 Progress Report, Ignition and Initiation Phenomena: Cookoff Violence Prediction, Lawrence Livermore National Laboratory (2002).
4. D, J. Steinberg, S. G. Cochran and M. W. Guinan, J. Appl. Phys, 51, 1498 (1980).
热门文档