Table 1. Composition, desorption properties, and lattice parameters of single-phase perovskites.
Avg.Weight Avg. Weight Weight loss Lattice
Nominal Composition
Loss vs. T Loss vs. Atm upon reduction Parameter (Å)
YSZ (3%) 0.470% 0.0955% N/A N/A Y0.1Sr0.9Co0.9Fe0.1O3-δ (YSCF1991) La0.1Sr0.9Co0.9Ni0.1O3-δ (LSCN1991) La0.1Sr0.9Co0.8Ni0.2O3-δ (LSCN1982) La0.1Sr0.9Co0.9Mn0.1O3-δ (LSCM1991) La0.1Sr0.9Co0.8Mn0.2O3-δ (LSCM1982) La0.1Sr0.9Co0.7Mn0.3O3-δ (LSCM1973) La0.1Sr0.9Co0.9Cr0.1O3-δ (LSCCr1991) La0.1Sr0.9Co0.9Fe0.1O3-δ (LSCF1991)

1.38% 1.21% 1.37% 1.36% 1.13% 0.949% 1.15% 1.45%
0.892% 0.624% 0.730% 0.707% 0.780% 0.910% 0.699% 0.624%
13.66% 13.98% 14.16% 14.00 12.99% 10.40% 12.99% 13.51%
3.840 3.847 3.847 3.845 3.844 3.841 3.868 3.852
Figure 2. Powder x-ray diffraction pattern of La0.1Sr0.9Co0.7Mn0.3O3-δ (a) after sintering at 1250 ºC and (b) after multiple-cycle TGA. The bottom pattern is a reference of a perovskite with the space group Pm-3m.
(silver-palladium) is used to ensure good electrical contact between the wires and the sample. The samples are placed in a tube furnace under controlled temperature and atmosphere. Measurements are being made in the 400º to 800 ºC range. A DC current source is connected to the wires at the ends of the sample and voltage drop across the other two wires is measured with a voltmeter. The conductivity is then simply determined from the current, voltage and the geometry. The initial measurements for each sample are done in air. Materials with high conductivity (comparable to that of the YSZ reference material) are measured in other pO2 atmospheres (e.g., UHP Ar and 3% hydrogen in Ar) to determine whether the conductivity is ionic or electronic: ionic conductivity will be independent of the oxygen pressure while electronic conductivity will scale with it. For materials of interest, AC measurements (impedance spectroscopy) will also be performed to learn more details about the mechanism of conductivity. In addition, a high temperature permeation unit is under construction to test the oxygen permeation properties of these materials at 850 ºC under an oxygen partial pressure differential. The unit will be connected to a residual gas analyzer (RGA) to monitor the permeate.
Conclusions
Double-substituted perovskites, A1-xSrxCo1-yByO3-δ (A=Y, La; B=Fe, Ni, Cr, Mn) were synthesized for use as ceramic high-temperature oxygen separation membranes. Preliminary results show the materials have promising oxygen sorption properties and are structurally robust under varying temperatures and atmospheres. Continuing work will focus on conductivity and permeation measurements, as well as stability under reaction conditions of H2SO4, SO2, and H2O at high temperatures.
Acknowledgement. Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the US DOE’s NNSA, contract DE-AC04-94-Al85000. The authors would like to thank John Heald for the acquisition of the x-ray data and Dr. Fred Gelbard and Dr. Terry Guilinger for their helpful discussions.
References
(1)Brown, L.; Besenbruch, G.; Lentsch, R.; Schultz, K.; Funk, J.; Pickard, P.; Marshall, A.; Showalter, S. High Efficiency
Generation Of Hydrogen Fuels Using Nuclear Power; Grant No. DE-FG03-99SF21888; Technical Report prepared for the Nuclear Energy Research Initiative (NERI) Program: December 2003. (2)Yang, Z.; Lin, Y.; Zeng, Y., High-temperature sorption process for air separation and oxygen removal. Ind. Eng. Chem. Res. 2002, 41, (11), 2775.
(3)Jade 6.5+, 6.5+; Materials Data Inc.: Livermore, CA, 2002. (4)Rodriguez-Carvajal, J. FullProf.2k, 2.60; ILL: 2004.
Prepr. Pap.-Am. Chem. Soc., Div. Fuel Chem. 2004, 49(2),842
Separation Oxygen-enriched Method and the Influence of Temperature and Magnetic...High-purity nitrogen (99.999%) with known volume and oxygen concentration ...
Separation of Acearyle... 8人阅读 6页 2.00 High Temperature Separ... 6人阅读 7页 2.00 Comparative Studies of... 1人阅读 6页 2.00...
High-Temperature Sulfur Removal in_电子/电路_工程科技_专业资料。High-...Ketene Air Separation Unit (ASU) Coal Low Temp Gas Cooling What is IGCC?...
The low-temperature region (up to SOVC) is kinetic in which the surface reaction rate of oxygen with carbon is limited. For the high-temperature ...
high-temperature gas separation and catalytic membrane reactors as well as ...S. Synthesis and Oxygen Permeation Properties of Thin YSZ/Pd Composite ...
A High-Performance Gas-Separation Membrane_工学_高等教育_教育专区。Angewandte...We crystallized small ZIF-90 particles at room temperature by the rapid ...
Moreover, direct one-step water splitting (thermolysis) requires the energy intensive process of high temperature oxygen–hydrogen separation coupled with ...
Single step separation for high-purity oxygen ? 100% selective for oxygen ...Can be integrated with other high temperature processes to produce electrical ...
High temperature brazing... 6页 2财富值 high temperature deforma... 4页... in contradistinction to the assumed separation of energy scales of previous ...
If simple and affordable air separation methods are successfully developed, ...cient. A high-temperature furnace using oxygen enrichment membranes has been ...
热门文档