文档下载 文档下载导航
设为首页 | 加入收藏
搜索 请输入内容:  
 导航当前位置: 文档下载 > systemcoreclock

systemcoreclock

  • system_stm32f4xx

    ...his call is made inside * the "startup_stm32f4xx.s" file.** - SystemCoreClock variable: Contains the core clock (HCLK), it can be used * by th...

  • 【原创】stm32f407的TIM1的中断和PWM

    ...)。sys时钟为HSE频率/PLL_M*PLL_N/PLL_P,定义HSE为25M,则sys时钟频率为168M*/GPIO_Config();TIM_Config();NVIC_Config();/*SystemCoreClock/1000时基为1ms*/if(SysTick_Config(SystemCoreClock/1000)){//__IO为volatile的宏定义1.0Date:2012.04.25TIM1PWMV1...

  • STM32固件库V3.3.0的CMSIS文件简析

    ...结构体,地址及用到的数据常量。h.包含stm32f10x_conf.h来配置外设i.定义位操作的宏3.system_stm32f10x.h和.c,这两个文件中:a.定义一个全局变量 uint32_t SystemCoreClock: 系统时钟频率与你选择有关 b.SystemInit():这个函数就是启动文件中调用的函数(1) 在system_stm32f10x.c的开始部份,选择相关的系统时钟频率,如#defi...

  • SysTick定时器自学笔记(含Stm32源程序)

    ...钟源即可。#include "Include.h"uint32_t time=1000;int main(void){ Init_LED(); SysTick_Config(SystemCoreClock/1000); while (1) { if(time==0) { D5_TOGGLE; time=1000; } }}其中Init_LED();包含了G...

  • STM32F时钟配置1

    ...controller system* Initialize the Embedded Flash Interface, the PLL and update the* SystemCoreClock variable.* @note This function should be used only after reset.* @param None* @retval None*/void...

  • stm产生pwm波

    ...C_Init(&NVIC_InitStructure); //预定标的值TIM1_Period = (time定时器频率 / pwm的频率) - 1 TimerPeriod = (SystemCoreClock / 50000 ) - 1; //Channel1Pulse的值可以按照下面的公式进行计算: //ChannelxPulse = DutyCycle * (TIM1_Period - 1) ...

  • stm32 systick 的设置

    ...两天再次接触STM32,使用了V3.5的库,突然发现繁琐的Systick用法被简化成一句话。即:void SysTick_Configuration(void){if (SysTick_Config(SystemCoreClock / 1000000))//72, 1us per tick {/* Capture error */while (1);}}而Systick_Config函数已经取代了之前所有的设置过程。sys...

  • STM32 SysTick 系统时钟 超简易定时器SysTick

    ...id SysTick_Configuration(void){/* Setup SysTick Timer for 100 msec interrupts */if (SysTick_Config((SystemCoreClock) / 10)) // 1/10s=100ms {/* Capture error */while (1);}NVIC_SetPriority(SysTick_IRQn, 0x...

  • stm32定时器延时时间

    ...局变量 //配置寄存器 void SysTick_InitStructReadCmd(void) { SYSTICK_VAL = 0; //当前值寄存器清零 SYSTICK_LOAD = SystemCoreClock / 1000000; //重要部分就在这里 系统72000000 / 100000 SYSTICK_CSR |= 0x06; //先关闭SysTick使能用的时候在打开 } //中断服务...

    最近文档搜索:

      站点地图 | 文档上传 | 侵权投诉 | 手机版
      本站所有资源均来自互联网,本站只负责收集和整理,均不承担任何法律责任,如有侵权等其它行为请联系我们.
      文档下载 Copyright 2013 doc.guandang.net All Rights Reserved.  -  email