1.首先复制底层的铺铜。(获得要铺的形状,信号层可以遵循设计的规则) 2.在底层双击新铺底层,将其改成bottom solder层,跳出重新铺铜时选择no。(改成要铺的层) 3.切换到bottom solder层。双击刚改过来的层,跳出重新铺铜时选择yes。(此处是为了将颜色改正确) 4.进行撤销操作(ctrl+z),跳出...
IDE SOLDER FILLING 品質提升改善案---PCEG DMD(I)產品工程部報告人:胡亮 2003.05Page 1
EddyCurrentInducedHeatingfortheSolderRe owofAreaArrayPackagesMingyuLi,HongboXu,Shi-WeiRickyLee,Fellow,IEEE,JongmyungKim,andDaewonKimAbstract—Thispaperpresentsafeasibilitystudyofusingeddycurrentinduced...
...题:在DXP中想去掉个别线的绿油怎么办?因为这些线走的电流有点大,等板子做出来之后再往上加锡。网上给出的一些答案:1、Protel DXP中屏蔽层(Mask Layers)中分为两种:阻焊层(Top/Bottom Solder)和阻粘层Top/Bottom Paste)。阻焊层(Top/Bottom Solder)中画的部分会取消阻焊剂使P板可以挂锡,那么阻粘层Top/Bottom Paste)是做什么用的?这个层叫锡膏层...
Issue of patent on Sn-Ag-Cu type lead-free solder settledWe would like to report that the issue of the patent on the Sn-Ag-Cu type lead-free solder between Japan and the U.S. has been settled and our ...
Introduction As a general statement, design issues that are pertinent to the wave solder process apply to selective soldering. It is assumed the reader has access to the Celestica Design Guide in ord...
PR77 Solder Mask MarketCanadaEurope Korea Hong Kong Taiwan China Singapore &Malaysia JapanUSAMarket share is increasing with excellent performanceSimon Lee
2004/8/30 14:32Electroplated AuSn Solder for Flip Chip Assembly and HermeticSealing Matthias Hutter, Maria von Suchodoletz, Hermann Oppermann, Gunter Engelmann, OswinEhrmann, Herbert ReichlFraunhofer ...
Solder Paste handling procedure1.0目的为了保证SP公司所有锡膏处于合理受控的状态,满足生产的需求 2.0 适用范围适用于SP公司锡膏管理。 3.0 职责3.1工程部3.1.1负责本程序的制定及更改,相关部门严格执行。3.2 生产部3.2.1 负责使用以及日常管理,使用过程中注意人身安全及环境保护。 4.0 定义IPQC-制程检验 5.0 参考文件 无...