文档下载 文档下载导航
设为首页 | 加入收藏
搜索 请输入内容:  
 导航当前位置: 文档下载 > 所有分类 > 外语学习 > 英语学习 > 机械设计与制造毕业设计论文中英文翻译外文翻译
侵权投诉

机械设计与制造毕业设计论文中英文翻译外文翻译

lubricants have varying noise characteristics that should be matched to the application. For example,greases produce more noise than oil. Nonrepetitive runout(NRR)occurs during rotation as a random eccentricity between the inner and outer races,much like a cam action.NRR can be caused by retainer tolerance or eccentricities of the raceways and balls.Unlike repetitive runout, no compensation can be made for NRR. NRR is reflected in the cost of the bearing.It is common in the industry to provide different bearing types and grades for specific applications. example, For a bearing with an NRR of less than 0.3um is used when minimal runout is needed, such as in disk—drive spindle motors.Similarly,machine—tool spindles tolerate only minimal deflections to maintain precision cuts.Consequently, bearings are manufactured wit

h low NRR just for machine-tool applications. Contamination is unavoidable in many industrial products,and shields and seals are commonly used to protect bearings from dust and dirt. However, perfect a bearing seal is not possible because of the movement between inner and outer races. Consequently, lubrication migration and contamination are always problems. Once a bearing is contaminated, its lubricant deteriorates and operation becomes noisier.If it overheats,the bearing can seize.At the very least, contamination causes wear as it works between balls and the raceway,becoming imbedded in the races and acting as an abrasive between metal surfaces. Fending off dirt with seals and shields illustrates some methods for controlling contamination. Noise is as an indicator of bearing quality.Various noise grades have been developed to classify bearing performance capabilities. Noise analysis is done with an Anderonmeter, which is used for quality control in bearing production and also when failed bearings are returned for analysis. A transducer is attached to the outer ring and the inner race is turned at 1,800rpm on an air spindle. Noise is measured in andirons, which represent ball displacement in μm/rad. With experience, inspectors can identify the smallest flaw from their sound. Dust, for example, makes an irregular crackling. Ball scratches make a consistent popping and are the most difficult to identify. Inner-race damage is normally a constant high-pitched noise, while a damaged outer race makes an intermittent sound as it rotates.

- 10 -

上一页第10页

你可能喜欢

热门文档

相关文档

站点地图 | 文档上传 | 侵权投诉 | 手机版
本站所有资源均来自互联网,本站只负责收集和整理,均不承担任何法律责任,如有侵权等其它行为请联系我们.
文档下载 Copyright 2013 doc.guandang.net All Rights Reserved.  -  email