Shell of die-casting mold CAD design and CAE simulation forming
ABSTRACT
Die casting is an improved version of permanent mold casting. In die casting, the molten metal is forced into the mold or die under pressure.
In this theise, the structure process of Shell of die-casting were analyzed. The structure of pressure die-casting mould was designed through the analysis of various process planning and the calculations of technological parameters of filling system, speed, temperature, pressure, etc. By using 3D Pre/E software, the die-casting model and the mould structure had been drawed when mould surface was designed. On the basis, the design of die-casting mould structure was optimized through the application of CAE simulating the presssure filling and solidification course. Then, the mould assembly, parts were drawed and the intensity of the key parts was checked. Furthermore, the formulation of cavity and core manufacture process card was made. Finally, the result demonstrates that the die-casting mould is optimizational structure, the manufacturing process is reasonable and the action is reliable.
Keywords: Die-casting mould;Feed system;Mould surface;Pro/E;CAE
压铸模设计说明书_机械/仪表_工程科技_专业资料。目 录 1 前言 ......压铸的分类方法很多,常见的分类方法有: 按压铸材料分:单金属压铸;合金压铸:铁合金压铸...
12 六、 参考文献 一、设计前准备工作 1、零件分析: 压力铸造是将液态或半液态的金属,在高压作用下,以高的速度填充压铸模 的型腔,并在压力作用下快速凝固而...
生产压铸模的企业,一般兼作其它 模具,但模具生产企业,不都生产压铸模。由于压铸...模具的装配图、零件工作图的设计 6、编写设计说明书和技术文件 6 2 产品设计 ...
压铸模设计手册(软件版)》的软件目录 )》的软件 附录 《压铸模设计手册(软件...计算说明 2.4.11 脱模斜度 2.4.12 可压铸的螺纹尺寸 2.4.13 压铸平头...
锌合金压铸模热处理工艺设计 材料与化工学院 080305108 李瑞 关键词: 关键词: 热作模具钢,H13,热处理,温度,时间。 引言: 引言: 压铸模生产效率高, 能压铸...
橡胶轴承压铸模具设计说明书_机械/仪表_工程科技_专业资料。2006 届毕业设计...压铸模具采用轴分式模腔等结构, 使模具结构简单合理;夹具采用心轴胀套式,使精...
1压铸模具设计说明书_机械/仪表_工程科技_专业资料。压铸模具设计说明书 专班 业: 级: 材料成型及控制技术 材料 3091 尚和轩 1205093038 李小城 学生姓名: 学...
压铸模具课程设计说明书_机械/仪表_工程科技_专业资料。压铸模具课程设计 班学姓 级号名 指导老师 学期 2010-2011 机电工程系 模具设计与制造专业 2011 年 1 ...
压铸模设计概述 (时间:1.5次课,3学时) http://www.wenyuan.com.cn/webnew...压铸机说明书上标明的压射速度是指空载时的速度。 经过对压铸机空载状态检测(...
压铸端盖设计说明书 29页 10财富值 阀盖压铸模设计小论文 5页 10财富值...压力铸造 种铸造及有色合金 20 年第 2 卷第 5055期 电刷端盖压铸模设计 胡...
热门文档