文档下载 文档下载导航
设为首页 | 加入收藏
搜索 请输入内容:  
 导航当前位置: 文档下载 > 所有分类 > IT/计算机 > 计算机软件及应用 > 6.5_SAN_CLINET
侵权投诉

6.5_SAN_CLINET

HP-UX servers rely on the SCSI pass through driver for SAN Client transfers.

Devices need to be created in the /dev/sctl directory before the SAN Client can

use them. Specifics for creating these devices is found in the NetBackup Device

Configuration Guide.

6.3 Linux

The Linux sg device layer does not perform discovery beyond LUN 0 by default.

Since the Fibre Transport server presents two LUNs on a single target you must

add sg devices for the second LUN to take advantage of the second Fibre

Transport device. The command used in Linux to manually add sg devices looks

like the following: echo "scsi add-single-device H C T 1" >

/proc/scsi/scsi

/dev/MAKEDEV sg

The target value H should be replaced by a host value. Typically you would add

entries for all the Fibre Transport servers in the SAN.

The target value C should be replaced by a channel value. Typically you would

add entries for all the controllers in the system.

The target value T should be replaced by a target value. Typically you would add

entries for targets 0-7 at a minimum.

The MAKEDEV directive creates any necessary device files to support the newly

added devices.

Linux clients using 2.4 kernels may require a reboot to discover new devices out

on the SAN. Linux 2.6 kernels can, in most cases, use the above procedure to

discover new devices on the SAN without a reboot. For a rescan to occur, you

need to create a script that performs echoes to /proc/scsi/scsi for each device on

the SAN.

6.4 Solaris

A Solaris SAN Client using the native Fibre Channel drivers can discover Fibre

Transport Targets without requiring a reboot. On Solaris you can run 'cfgadm -al'

to list all the available Interfaces on the system. From here you can determine

what interface is connected to the SAN Client fabric and run a 'cfgadm -c

configure node' to create device entries for the Fibre Transport devices.

Solaris requires entries in the /kernel/drv/st.conf to discover any devices above

LUN 0 on a SCSI target. Since the Fibre Transport server presents two LUNs on

a single target you must add entries for the second LUN to take advantage of the

second Fibre Transport device. Each entry is of the form:

name="st" class="scsi" target=X lun=1;

The target value X should be replaced by a target value. Typically you would add

entries for targets 0-7 at a minimum.

上一页第8页

你可能喜欢

热门文档

相关文档

  • 网络存储讲义

    (Server/Clinet)模式,到今天的网络计算(Network Computing)环境,今后的移动计算(...数据存储和数据备份 第一部分 网络存储技术目前的网络存储技术有SAN、NAS和iSCSI...

  • 曙光存储 DS8340简明手册

    (即直接将管理软件安装在曙光天阔 A950r-F 数据库服务器上,通过 FC SAN 管理...“SANtricity Storage Manager Clinet”运行 SANtricity 存储管理软件,出现如图 6-...

  • 网络存储介绍-含DAS-NAS-SAN的区别

    网络存储介绍-含DAS-NAS-SAN的区别_计算机硬件及网络_IT/计算机_专业资料。...(Server/Clinet)模式,到今天的网络计算(Network Computing)环境,今后的 移动计算...

  • IBM数据中心存储解决方案

    数据中心存储解决方案.存储区域网(SAN) IBM 数据中心存储解决方案.存储区域网(...从计算机的发展历史来看,从最早的服务器 /客户机(Server/Clinet)模式,到今天的...

  • 网络存储技术及其备份与容灾

    (Server/Clinet)模式,到今天的网络计算(Network Computing)环境,今后的移动计算(...数据存储和数据备份 第一部分 网络存储技术目前的网络存储技术有SAN、NAS和iSCSI...

  • 15-数据存储技术

    (Server/Clinet)模式,到今天的网络计算(Network Computing)环境,今后的移动计算(...SAN网络架构 SAN的特性 SAN更适合网络关键任务的数据存储,与其 他存储技术相比,...

  • 数据存储技术概述

    (Server/Clinet)模式,到今天的网络计算(Network Computing)环境,今后 的移动计算...对等资源共享 SAN网络架构 SAN网络架构 SAN存储系统五大组成 SAN存储系统五大组成...

  • VMware vSphere5.0安装实施步骤

    现在就可以使用vSphere clinet连接vCenter了。 第 30 页 1.4. VMware vCenter...后保存到目标存储, 该目标存储通过的存储设备如: 本地存储, ISCSI, SAN, NFS...

  • VMware vSphere 5.1 虚拟机管理

    使用 WEB Clinet 管理虚拟机 七、 使用 workstation 9.0 管理虚拟机 以上的...硬盘添加到虚拟机时, 您可创建虚拟磁盘、 添加现有虚拟磁盘或添加映射的 SAN ...

  • SANTricity操作手册

    点击“开始”->“程序”->“SANtricity Storage Manager Clinet”,出现如图2-...第一种方式是通过SANshare Storage Partitioning Wizard 完成,点击菜单项Mapping ...

站点地图 | 文档上传 | 侵权投诉 | 手机版
本站所有资源均来自互联网,本站只负责收集和整理,均不承担任何法律责任,如有侵权等其它行为请联系我们.
文档下载 Copyright 2013 doc.guandang.net All Rights Reserved.  -  email