Journal of Sound and Vibration (1989) W(2),
364-368
ACTIVE
VIBRATION
CONTROL 1.
USING
WAVE CONTROL
CONCEPTS
INTRODUCTION
Active vibration control is an important approach to vibration problems in future large flexible space structures. These structures are usually built from lightweight materials with low damping, and will be very flexible due to the thin large-size elements from which they will be constructed. Vibration in such large space structures may lead to fatigue, instability and other destructive results. The modal-space and wave control are two main approaches in active vibration control. Much theoretical work on the modal-space control technique has already been published in the literature, as cited in the reference[ 11. The experimental work[2, 31 on the control of beam vibration has mostly considered using low-authority approaches. Active damping is added to a few main modes by applying forces to the beam. In recent years the wave control approach in active vibration control has received attention[4-71. Wave-absorbing controllers for a flexible beam have been discussed by Flotow and Schafer[4]. The active minimization of the vibrational strain energy of a periodically excited structure by the action of suitably located secondary source has been discussed by Curtis, et al.[6]. Experiments relating to the reduction of the magnitude of the vibrational power flow associated with propagation of flexural waves in elastic structures have been conducted by W. Redman-White et al.[7]. In what follows the control model for a string of finite length is discussed for the wave absorption mechanism. The idea of suppressing the resonance of a vibrating system by a wave-absorbing termination is emphasized in this note. The suppression of acoustic resonance through the use of absorbing termination has been discussed by Curtis, et al. and Doak[8, 91. In this note the results for the total vibrational energy (kinetic energy plus strain energy) of a string with and without suppressing the resonance are compared. 2. CONTROL MODEL FOR FINITE LENGTH STRING
We consider the problem of the vibration of a finite string of length L with one end (x= 0) fixed, a simple harmonic excitation force Fe’” applied at x= 5 and a control force G eio’ applied at the free end (x= L). The configuration is shown in Figure 1. The transverse deflection u(x, t) of the string may be described by the equation E a2u/at2= T d2u/~x2+&3(x - 5) eiw’+ G6(x - L) e’“‘, with the boundary conditions u(0, t)= 0, g(L, r)=0, (2) L~X~O, (1)
where E is the string mass per unit length, and T is the tension in the string.
Figure 1. Active vibration control on a string with one end (x= 0) fixed, and another end (x= L) free. 364 0022-460X/89/200364+05$03.00/O@ 1989 Academic Press Limited

























Active Rotor-Blade Vibration Control Using Shaft-Based Electromagnetic Actuation 隐藏>> Active Rotor-Blade Vibration Control Using Shaft-Based Electromagnetic ...
active vibration control of seismic excited tall buildings using a multiple ...have been devised using system control theory concepts, which make use of ...
ACTIVE VIBRATION CO... 43页 免费 (重点)Concepts and Met... 15页 免费...tolerant active vibration control is conducted in real-time using the BJ ...
Part B journal homepage: www.elsevier.com/locate/compositesb Active vibration control of lattice sandwich beams using the piezoelectric actuator/sensor pairs...
Buildings, Equipment and Pipe Networks Vibration and Noise Control Using SERB Devices_电子/电路_工程科技_专业资料。Journal ofMaterials Science and Engineering...
(Wind Turbine Control Basic Concepts) 发电运行控制...(FSSR: Active Stall (2)) 0 -1 Pitch angle ...(Low structural damping – may require vibration ...
(Wind Turbine Control Basic Concepts) 发电运行控制...(Active stall a possibility) 载荷 (LOADS:) 稳态...但 vibration absorbers? (Fatigue loads can be ...
ACTIVE CONTROL OF SOUND RADIATED FROM A BAFFLED PIPE OPENING 隐藏>> Jing... at the bottom of the pipe is used to generate sound and vibration. ...
vibration control industry Chapter 1: Review of China noise and vibration control industry 1.1 concepts and definitions of the industry 1 definition of ...
Topics include vibration and noise reduction, rotor...Thus, many of the active rotor control concepts ...active-twist rotor control is discussed using ...
热门文档