DIRECT SHEAR TEST
梁斌 土木工程111 2011146207 指导老师:高凌霞
Objective
To determine the shearing strength of the soil using the direct shear apparatus.
Planning and organization
Apparatus
1. Direct shear box apparatus
2. Loading frame (motor attached).
3. Dial gauge.
4. Proving ring.
5. Tamper.
6. Straight edge.
7. Balance to weigh up to 200 mg.
8. Aluminum container.
9. Spatula.
Knowledge of Equipment:
Strain controlled direct shear machine consists of shear box, soil container, loading unit, proving ring, dial gauge to measure shear deformation and volume changes. A two piece square shear box is one type of soil container used.
A proving ring is used to indicate the shear load taken by the soil initiated in the shearing plane. Procedure
1. Check the inner dimension of the soil container.
2. Put the parts of the soil container together.
3. Calculate the volume of the container. Weigh the container.
4. Place the soil in smooth layers (approximately 10 mm thick). If a dense sample is desired tamp the soil.
5. Weigh the soil container, the difference of these two is the weight of the soil. Calculate the density of the soil.
6. Make the surface of the soil plane.
7. Put the upper grating on stone and loading block on top of soil.
8. Measure the thickness of soil specimen.
9. Apply the desired normal load.
10.Remove the shear pin.
11. Attach the dial gauge which measures the change of volume.
12. Record the initial reading of the dial gauge and calibration values.
13. Before proceeding to test check all adjustments to see that there is no connection between two parts except sand/soil.
14. Start the motor. Take the reading of the shear force and record the reading.
15.Take volume change readings till failure.
16. Add 5 kg normal stress 0.5 kg/cm2 and continue the experiment till failure
17. Record carefully all the readings. Set the dial gauges zero, before starting the experiment Data Calculation Sheet for Direct Shear Test
dynamometer coefficient;1.750kpa∕0.01mm
室内试 验常用的方法有直接剪切试验、三轴剪切试验;现场原位 测试的方法有十字...3、试验优缺点和适用范围 直接剪切试验是测定土的抗剪强度指标常用的一种试 验...
(三)试验优缺点和适用范围直接剪切试验是测定土的抗剪强度指标常用的一种试验方法.它的优点 优点是具 优点 有仪器设备简单,操作方便等. 它的缺点 缺点主要包括:...
室内试 验常用的方法有直接剪切试验、三轴剪切试验;现场原位 测试的方法有十字...3、试验优缺点和适用范围 直接剪切试验是测定土的抗剪强度指标常用的一种试 验...
第二节 土的抗剪强度指标的确定 测定土的抗剪强度指标的试验方法主要有室内剪切试验和现场剪切试验二 大类,室内剪切试验常用的方法有直接剪切试验、三轴压缩试验和...
解:已知最大主应力σ1=300kPa,将有关数据代 入公式,得最小主应力的计算值: 4.3 抗剪强度试验方法 ? 测定土抗剪强度指标的试验称为剪切试验 ? 按照常用的...
二 土的剪切试验 ? 测定土抗剪强度指标的试验称为土的剪切试验。 土的抗剪强度指标可通过室内或现场试验测得,也可 以通过直接试验与某些现场原值测试指标的相关...
直接剪切实验一、 实验目的直接剪切实验是测定土的抗剪强度的一种常用方法,通常...水平剪切力进行剪切,测出破坏时剪应 力,然后根据库仑定律确定土的抗剪强度指标:...
软粘土的灵敏度可用( )测定。 (A)直接剪切试验 (B)室内压缩试验 (C)标准贯入试验 (D)十字板剪切试验 9.饱和粘性土的抗剪强度指标( )。 (A)与排水条件有...
2、用三轴试验测定土的抗剪强度指标,在其它条件都... 野外鉴别 )(C)排水剪切试验 (D)直接剪切试验 )... 新市场营销法则 助推企业成长 999感冒灵市场营销方案...
目前 , 试验 室测定土的抗剪强度指标 的方 法有三轴压缩试验、直接剪切试验 、无侧限抗 压试 验。 2三轴压缩试验 三轴压缩试验直接量测的是试样在某一固定...
热门文档