文档下载 文档下载导航
设为首页 | 加入收藏
搜索 请输入内容:  
 导航当前位置: 文档下载 > 所有分类 > 工程科技 > 能源/化工 > Power System State Estimation with Unified Power Flow Controller
侵权投诉

Power System State Estimation with Unified Power Flow Controller

Power System State Estimation with Unified Power Flow Controller

SUN Guo-qiang ,WEI Zhi-nong

Abstract--With the flexible of AC transmission systems

(FACTS) technique, the power flow in the interconnected power systems can be controlled flexibly. Unified power flow controller (UPFC) is one of the most important components of FACTS. Based on the conventional power system state estimation model, a kind of model for state estimation with UPFC is introduced in this paper, in which power injection model is used and the affect of UPFC on the power flow is transferred to the two nodes of the corresponding transmission line. This method can be integrated to the conventional state estimation program with the consideration of UPFC. The results demonstrate that the model is effective for practical use.

Index Terms-- unified power flow controller; power system; state estimation

I. INTRODUCTION

D

UE to the enlargement of interconnected electric power system and the increasingly complexity of electric power system structure, hence energy management system(EMS)is critical for modern power system[1]-[3]. State estimation plays an important role in EMS, which provides a reliable and consistent system data by processing real time redundant telemetered and pseudo measurements. These measurements typically consist of bus voltage magnitudes, real and reactive line flows and power injection. Processing these real time data, different kinds of advanced application software in EMS are derived, such as voltage stability analyses, security constraint and transient stability analysis et al.

Since the concept of flexible AC transmission systems (FACTS) was proposed by Hingorani in the 1860s[4], many various FACTS devices have been utilized to meet a growing demand of the transfer capabilities due to developing wheeling transactions in the deregulation environment. Some interesting applications of FACTS devices can be found to economic dispatch(ED), AC/DC optimal power flow(OPF), available transfer capability(ATC), contract path based electricity trading, and transmission congestion management[5][6]. UPFC, a versatile FACTS device, has the unique capability to control simultaneously both the voltage magnitude and active and reactive power flows on a transmission line. So, there has been increasing interest in the analysis of UPFC in power system[7][8]. SUN Guo-qiang ,WEI Zhi-nong are with the Department of Electrical

Engineering, Hohai University, Nanjing, Jiangsu 210098, P.R.China. (e-mail: hhusunguoqiang@163.com,wzn_nj@263.net).

978-7-900714-13-8/08/ ©2008 DRPT

However, very limited efforts have been made to study the impact of FACTS devices on power system state estimation[9][10]. A new method is introduced to incorporate UPFC devices into the power state estimation. This paper attempts to deduce the model of state estimation with UPFC using the conventional power system state estimation model. A power injection model that transfers the affect of UPFC towards the power flow to the two nodes is presented. This method can be integrated to the conventional state estimation program with the consideration of UPFC. Furthermore, the results demonstrate that the model is effective for practical use.

II. STATE ESTIMATION FOR POWER SYSTEM

EMBEDDED WITH UPFC

A. Modeling of UPFC in State Estimation

A number of papers have discussed the modeling of UPFC in power system. The models can be classified into the following categories: power injection model, voltage source model, impedance model. Power injection model is a suitable model in this application because this model is very simple in terms of implementation in power system state estimation and can retain the structure of the original system. Therefore it is convenient for implementing in existing power system state estimation program. A power injection model consists of one controllable series injected voltage source and one controllable shunt injected current source. The equivalent circuit of UPFC placed in the line between bus-i and bus-j is shown in Fig.1.

Power System State Estimation with Unified Power Flow Controller

Fig.1 Equivalent circuit model of UPFC

In Fig.1, yij(yij=gij+jbij) is the line admittance. The controllable series injected voltage source and controllable shunt injected current source are defined as E c=Ec∠δEc

and I c=Ic∠δIc(0≤Ec≤Ecmax,0≤Ic≤Icmax,0≤δEc≤2π

,

0≤δIc≤2π

).Let

I i

、

I j

, S i= Pi+ Qiand

S j= Pj+ Qj

denote the addition

第1页

你可能喜欢

热门文档

相关文档

站点地图 | 文档上传 | 侵权投诉 | 手机版
本站所有资源均来自互联网,本站只负责收集和整理,均不承担任何法律责任,如有侵权等其它行为请联系我们.
文档下载 Copyright 2013 doc.guandang.net All Rights Reserved.  -  email