Comparison of TI Voice-Band CODECs for Telephony Applications
SLAA088
2.1.3
Technical Specs of the Recommended TI AICs Table 3 lists the technical specifications of the recommended AICs. Note the high resolution and excellent signal-to-noise specifications. Table 3. AIC Technical Specifications (Recommended Devices) RECOMMENDED TI (AICS): SPECS TLC320AD50 TLC320AD52 5 V (10%,–5%) or 5 V analog and 3 V (±10%) digital 22.05 kHz 16 9.92 120 89 79 VI= 3 dB 89 82 88 Sigma delta
TECHNICAL SPECIFICATIONS
TLC320AD535 5 V or 3.3 V (±10%) or both 11.025 kHz 16 4.96 240 76 74 VI=–3 dB 80 77 80
TLC320AD545 5 V or 3.3 V (±10%) or both 11.025 kHz 16 4.96 120 77 78 VI=–3 dB 81 76 80
TLV320AD543
TLC320AD56 5 V (±5%) or 5 V analog and 3 V (±10%) digital 22.05 kHz 16 8.82 100 85 84 VI= 0 dB 86 78 85 Sigma delta
Power supply requirements Sample frequency (max) Resolution (bits) Bandwidth Power Dissipa
tion (typ, mW) DAC SNR (dB, typ), VI=0dB DAC THD+N (dB, typ) ADC SNR (dB, typ) VI=–1 dB ADC THD+N (dB, typ), VI=–3 dB Dynamic range (dB, typ)
3 V (±10%) 11.025 kHz 16 4.96 90 77 78 VI=–3 dB 78 76 79
Converter technology Sigma delta Sigma delta Sigma delta The test condition is a 1020-Hz input signal with an 8-kHz conversion rate.
2.1.4
Recommended TI AIC and Modem Algorithms The AIC is a client-side device specifically targeted for modem applications. Table 4 lists the various modem algorithms along with the suggested TI AIC. Note that the combination of AIC performance, DSP algorithm robustness, and operational line conditions is what make a modem design successful. All of these should be considered when choosing the AIC. The item of interest when evaluating an AIC with a modem algorithm is the signal-to-noise ratio (SNR) specification of the AIC. Table 4. Modem Algorithm and Recommended AIC MODEM ALGORITHM V.90 V.34 RECOMMENDED AIC (Client Modem CODEC) TLC320AD535, TLC320AD545, TLC320AD50, TLC320AD52 TLC320AD535, TLC320AD545, TLV320AD543, TLC320AD56, TLC320AD52, TLC320AD50 TLC320AC01 , TLC320AC02 TLC320AC01 , TLC320AC02 SAMPLE RATES (k Samples/Sec) 9.6 8.4, 11.2, 12.8 TYPICAL SNR REQUIREMENTS>80 dB>70 dB
V.32bis V.22bis
7.2, 9.6 8, 9.6
>55 dB>35 dB
The TLC320AC01 and AC02 are older devices.
2.1.5 6
Applications for AICs The AIC can be used in a variety of applications (besides modems) such as: Teller machines
Comparison of TI Voice-Band CODECs for Telephony Applications

video-on-demand, 3D gaming and video telephony....for developing handset UI and BREW applications ?...Go Online CHIPSET COMPARISON ONLINE TOOL Please ...
Comparison TeakLite-II Architecture Type Traditional,...(audio, voice, telephony) High performance, low ...codecs for full HD applications > SATA/SAS – ...
telephony and high-rate packet data applications. ...For comparison, the fixed rates of the AMR-WB ...narrowband codecs (e.g., EVRC and SMV [3, ...
and/or voice-messaging applications – that are...in-band signaling found in analog telephony to ...Comparison and optimization of packet loss repair ...
support for low bit rate and wideband codecs. ...DSP External Memory Interface Telephony Interface ...Voice Applications Services APIs to access DSP ...
for telephony (ITU) Variations in delay (jitter)...codecs: narrowband / wideband G.711, G.723.1A...applications 基于TI DSP软件应用架构设计的DSP软件,...
telephony equipment and save on consultants’ fees... and integrates with your network/applications ...//www.3cx.com/phone -system/editioncomparison....
voice codecs cannot be guaranteed to reproduce ...Some applications, such as gateways into the PSTN...Tones for telephony events are in the range of ...
comparison of the key issues in sessionbased ...voice, video, data, media applications, using IP... working in real-time, such as IP telephony ...
comparison of the key issues in sessionbased ...voice, video, data, media applications, using IP... working in real-time, such as IP telephony ...
热门文档