
6. IC通讯
6.1. I2C通讯
GT911提供标准的I2C通讯接口,由SCL和SDA 与主CPU进行通讯。 在系统中GT911 始终作为从设备,所有通讯都是由主CPU发起,建议通讯速度为400Kbps或以下。其支持的I2C

硬件电路支持时序如下:





2
测试条件1:1.8V通讯接口,400Kbps通讯速度,上拉电阻2K
Parameter SCL low period tlo SCL high period thi SCL setup time for START condition tst1 SCL setup time for STOP condition tst3 SCL hold time for START condition thd1 SDA setup time tst2 SDA hold time thd2 测试条件2:3.3V通讯接口,400Kbps通讯速度,上拉电阻2K Parameter SCL low period tlo SCL high period thi SCL setup time for START condition tst1 SCL setup time for STOP condition tst3 SCL hold time for START condition thd1 SDA setup time tst2 SDA hold time thd2 GT911的I2C从设备地址有两组,分别为0xBA/0xBB和0x28/0x29。主控在上电初始
化时控制Reset和INT口状态进行设定,设定方法及时序图如下: 上电时序图:
手机触控芯片(???) 极具量产性的单层多点触控芯片 量产仅一年,出货量已超 60...主动式电容笔(???) 真实多点触控 (多达 10 点) 可支持尺寸:4.5” ~10....
热门文档