文档下载 文档下载导航
设为首页 | 加入收藏
搜索 请输入内容:  
 导航当前位置: 文档下载 > 所有分类 > 工程科技 > 建筑/土木 > Numerical simulation of a bridge-subgrade transition zone due to moving vehicle in heavy railway
侵权投诉

Numerical simulation of a bridge-subgrade transition zone due to moving vehicle in heavy railway

Chengfei Yin, Biao Wei. Numerical simulation of a bridge-subgrade transition zone due to moving vehicle in Shuohuang heavy haul railway,Journal of Vibroengineering, 2013,15(2):1062-1068

1021. Numerical simulation of a bridge-subgrade transition zone due to moving vehicle in Shuohuang heavy haul railway Chengfei Yin1, Biao Wei2 1School of Civil Engineering, Beijing Jiaotong University, Beijing 100044, China

1Shuohuang Railway Corporation, Yuanping 034100, China

2School of Civil Engineering, Central South University, Changsha 410075, China

2Corresponding author

E-mail: 1chengfeiyin@163.com, 2weibiao@csu.edu.cn

(Received 24 April 2013; accepted 3 June 2013)

When a vehicle passes through the bridge-subgrade transition zone, the dynamic effects between the vehicle and infrastructure, including track, subgrade will increase greatly. In this paper, a three dimensional model of bridge-subgrade transition zone under moving vehicle in Shuohuang Railway is established. The vehicle is idealized as 18 degree of freedoms multi-body system and the bridge-subgrade transition zone is built using ABAQUS software. With this model, some dynamic responses of bridge-subgrade transition zone under moving vehicle with and without track irregularity are computed. It is concluded that the track irregularity can amplify the dynamic responses in the transition zone significantly.

Keywords: heavy haul railway, bridge-subgrade transition zone, finite element model, track irregularity, dynamic response.

1. Introduction

To maintain the rapid economic development, China is seeking to solve its current shortage of transport capacity by developing its heavy haul railways. Shuohuang heavy haul railway is the second coal-dedicated railway for China’s West-to-East coal transport. The total length of this line is 588 km, which origins from Shenchi railway station, Shuozhou city, Shanxi province, ends in Huanghua port in Cangzhou city, Hebei Province. In 2011, Shuohuang railway coal shipment hits record high, with 177 million tons of coal, increasing 7.2 million tons or 4.23 % from the year’s transport target [1].

Recently, a new type railway train hauled twenty thousand tons coal has operated since December 27th, 2011 [2]. The total length of this train is 2720 m with total weight 21600 tons. However, the increasing heavy axle loads and high-density transport condition will intensify the damage of the infrastructure, especially in the bridge-subgrade transition zones where the stiffness and deformation changed suddenly. Therefore, much more attentions have been paid on the railway transition zones. Dimitrovova et al. presented several simple models to investigate the dynamic responses of the transition zones. In these models, the train loading was regarded as moving load, and the transition zone was modeled as finite/infinite beam with different stiffness supporting by piece-wise homogeneous foundation [3, 4]. Zakeri et al. modeled the ballasted and slab tracks as two dimensional model with two-layer masses and the transition zone as three segments with different specification and stiffness to study the dynamic responses of railway track transition under moving vehicle [5]. Varandas et al. developed a numerical model for the dynamic loads on the ballast caused by trains passing over the culvert and the long-term behavior of the transition zones due to train loading were brought out [6, 7]. In the above mentioned work, several important conclusions have been brought out; however, all of these numerical models are two dimensional and some conditions in reality, including bridge dimensions, subgrade materials should be considered for practical use.

In this paper, a three dimensional bridge-subgrade transition zone model under moving vehicle is developed with finite element method. The vehicle is idealized as 18 degree of freedoms model 1062 VIBROENGINEERING. JOURNAL OF VIBROENGINEERING. JUNE 2013. VOLUME 15, ISSUE 2. ISSN 1392-8716

第1页

你可能喜欢

热门文档

相关文档

站点地图 | 文档上传 | 侵权投诉 | 手机版
本站所有资源均来自互联网,本站只负责收集和整理,均不承担任何法律责任,如有侵权等其它行为请联系我们.
文档下载 Copyright 2013 doc.guandang.net All Rights Reserved.  -  email