
Electrochemical Study of the Additive-effect on Sn Electrodeposition
in a Methansulfonate Acid Electrolyte
JinMing Long1, a, Zhu Zhang2,b , ZhongCheng Guo2,c,
XiaoYun Zhu 1,d and Hui Huang2,e
1
School of Materials Science and Engineering, Kunming University of Science and Technology,
Kunming 650093, China
2
Faculty of Metallurgy and Energy Engineering, Kunming University of Science and Technology,
Kunming 650093, China
a
jinminglong@sina.com, bzzpenguin@163.com, cguozhch@vip.163.com,
d
zuxiaoyun1998@126.com, ehuihuanghan@163.com
Keywords: Tin plating; Stannous methanesulfonate; Additive; Overpotential; EIS.
Abstract. The effect of three organic additives in stannous methanesulfonate baths on cathodic overpotential and Faradaic impedance of tin-electrodeposition were studied by measuring cathodic polarization curves, galvanostatic responses and electrochemical impedance spectroscopy. The results show that the composite additive consisting of three organic compounds can significantly increase the cathodic polarization, crystallization overpotential and charge transfer resistance, which is very beneficial to improve coating quality and result in a fine-grained and smooth matt tin coating. Introduction
The tin plating baths traditionally used include sulfate, fluoborate, sulfophenylate, and so on[1-3]. For the reason of toxic and difficult to treat waste water, they could hardly meet the need of environmental protection. Nowadays as a new kind of environmental friendly electroplate liquid, methanesulfonic acid electrolyte has been used more and more popular and has been gradually replacing the traditional baths. The additives in stannous methanesulfonate baths play an important role in electrodeposition of the tin coatings which would be loosened, dendritic and poor adherent with matrix in the absence of organic additives. So organic additives are often used to obtain compact electrodeposits of tin. All kinds of additives can be identified such as surfactants, brighteners, and grain refiners[4,5]. Martyak et al.[4] found that the presence of polyethylene glycol, polypropylene glycol and phenolphthalein in acid tin methanesulfonate baths produces smooth tin deposit.
In this work, the effects of three additives on the cathodic polarization curve, cathodic potential during electrodeposition at galvanostatic conditions, electrochemical impedance spectroscopy (EIS) in the stannous methanesulfonate baths were studied in order to verify their behaviors and reasonably select suitable additives for stannous methanesulfonate bath. Experimental Details
Tin plating solutions were prepared by diluting Sn(II) methanesulfonate (SMAS, obtained from Yunnan Tin Company Group Limited) and commercially available methanesulfonic acid (98%CH3SO3H, MSA) into redistilled water. The final Sn(II) and MSA concentrations were 22 g/L and 190 g/L respectively. Organic additives are very often used to modify certain physical properties of Sn deposits (their brightness for example) and they markedly affect crystal structure. As additives, here, three compounds, nonionic surfactant Triton X-100 (abbreviated as TX100), a weak organic acid (additive A (-(CO)-O-)) and an organic sodium salt (additive B(-C6H4-(CO)-) ), were chosen to

examine their behaviour in electrodeposition. They belong to levelling agents or/and brighteners. The
voltammetric study of the kinetics and mechanism of electrodeposition of ...The electrochemical deposition of EMD on an inert electrode in an electrolyte...
(NH4SCN) as an additive in manganese electrodeposition from an acidic ...2. Experimental The electrochemical and electrogravimetric study of the ...
the end of ca experiments during the pH effect study are presented in Fig...The electrochemical techniques had a dual role: (a) copper electrodeposition,...
Furthermore, we perform a parametric study to ...The electrochemical cell was held at different ...Electrodeposition conditions of the hierarchical ZnO ...
15 Numerical study of ma... 16页 免费 ... Effects of addition of c... 暂无评价 16页 ...All the electrodeposition and electrochemical ...
Sodium Sulfate Effects on the Electrochemical ...electrodeposition kinetics on glassy carbon electrodes... not only can be used as commercial additive ...
2012, P. 159 Electrochemical study on preparation...In this paper, multi-electrodeposition is proposed...The effect of alloy composition on the ...
The Effect of Chelating Copolymer Additive on the Yttrium Iron Garnet Nano...the additive of the preparation of YIG precursor in our previous study[2]...
metals and those electroplated without additive. Comparison of the electrodeposition results indicate ...both inhibiting and accelerating effects [1,7–9...
22-Highly Efficient Direct Electrodeposition of Co...study the influence of the tube thickness on the... mode in a two-electrode electrochemical cell. ...
热门文档