
Additive-Effects on the Morphological and Structural Characteristics of
Matt Tin Electrodeposits from a Methansulfonate Acid Bath JinMing Long 1, a, Zhu Zhang2,b , ZhongCheng Guo2,c and XiaoYun Zhu 1,d
1
School of Materials Science and Engineering, Kunming University of Science and Technology,
Kunming 650093, China
2
Faculty of Metallurgy and Energy Engineering, Kunming University of Science and Technology,
Kunming 650093, China
a
jinminglong@sina.com, b513100449@qq.com, cguozhch@vip.163.com,
d
zuxiaoyun1998@126.com
Keywords: Tin plating; Stannous methanesulfonate bath; Additive; Microstructure; Texture.
Abstract. The methansulfonate acid electrolyte is a new type of plating baths which has some advantages such as friendly to environment, stability and outstanding electrical conductivity. In this work, the effect of three organic additives (nonionic surfactant Triton X-100, a weak organic acid (additive A) and an organic sodium salt (additive B)) in stannous methanesulfonate baths on tin electrodeposits were studied by SEM and XRD. The results show that the Triton X-100 plays an important role in improving the coating qualities and promoting the densification of crystalline structure. Under the synergetic action of additive A and additive B in the presence of Triton X-100 a smooth, fine-grained matt tin coating which has certain preferred orientations of lattice plane, could be obtained on copper substrate. Introduction
Electrolytic tin plating on steel substrate has been widely used in the food and beverage industries due to its nontoxic nature [1]. Recently, it also has been applied in the electronic industry because of its strong resistance to corrosion and tarnishing of the component leads, solderability and ductility. The major tin plating electrolytes traditionally used are those based on sulfuric acid, phenolsulfonic acid, hydrofluoric acid or fluoboric acid and their salts [2], which are faced more or less with problems of environmental protection due to the toxicity and difficulty in treating waste water. Nowadays as a new kind of environmental friendly electroplate liquid, methanesulfonic acid electrolyte has been used more and more popular and has been gradually replacing the traditional baths. Therefore, it is necessary to understand the effects of electroplating conditions on tin deposits from methanesulfonic acid bath.
Our previous study [3] on tin plating from stannous methanesulfonate electrolyte containing organic additives showed that the additives observably influence the cahodic polarization and Faradaic impedance. In this work, the effects of three organic additives in the stannous methanesulfonate baths on the crystal structure and surface morphology of the tin coatings, were studied in order to verify their behaviors and reasonably select suitable aditives for stannous methanesulfonate bath. Experimental Details
Tin plating baths were prepared by diluting Sn(II) methanesulfonate (SMAS, obtained from Yunnan Tin Company Group Limited) and commercially available methanesulfonic acid (MSA) into redistilled water. The final Sn(II) and MSA concentrations were 22 g/L and 190 g/L respectively. As additives, three organic compounds, nonionic surfactant Triton X-100 (abbreviated as TX100), a weak organic acid (additive A (-(CO)-O-)) and an organic sodium salt (additive B(-C6H4-(CO)-) ),

were used alone or in a mixing state. They belong to levelling agents or/and brighteners. Five tin
Annealing Effects on t... 5人阅读 5页 2.00 Effects of ultrasonic ... 2人阅读 7页 2.00 Effects of structural ... 1人阅读 5页 2.00...
Effects of SrO–B2O3–SiO2 glass additive on the microstructure and dielectricof CaCu3Ti4O12_化学_自然科学_专业资料。J Mater Sci: Mater Electron (2012) ...
Effects of hydraulic structures on river morphological processes_专业资料 暂无评价
Effects of SrO–B2O3–SiO2 glass additive on the microstructure and dielectricof CaCu3Ti4O12_化学_自然科学_专业资料。J Mater Sci: Mater Electron (2012) ...
热门文档