文档下载 文档下载导航
设为首页 | 加入收藏
搜索 请输入内容:  
 导航当前位置: 文档下载 > 所有分类 > The VST telescope control software in the ESO VLT environment
侵权投诉

The VST telescope control software in the ESO VLT environment

The VST (VLT Survey Telescope) is a 2.6 m Alt-Az telescope to be installed at Mount Paranal in Chile, in the European Southern Observatory (ESO) site. The VST is a wide-field imaging facility planned to supply databases for the ESO Very Large Telescope (VL

Between the operating system and the applicationlayer there is a software layer developed by ESO forVLT which is reused for VST, the VLT CommonSoftware, providing a lot of utilities, tools and commonservices to the application programmer.

2

TELESCOPE CONTROL

SOFTWARE

2.1 Introduction

The VST Telescope Control Software (TCS) is thesoftware package responsible for: Control and monitoring of the telescope

Interface to users and other VST softwarepackages

Interface to star catalogues

2.2 Module structure

Each TCS module is provided with a CommandDefinition Table (CDT) which is normally used for allinter-module communications and is also used by theTCS user interface panels.

In the TCS general module architecture all themodules are implemented through one or moreindependent processes. If a module is made up of morethan one process only one of them is the “control”process which provides the public interface, receivescommands from other modules and sends back thecorresponding replies. In order to respect theserequirements every process is designed in an event-driven way and the implementation is based on theevent-handler design. The TCS package is composedby several modules associated to the telescopesubsystems to be handled.

Each module is organized in processes and functionsdedicated to the LCU and/or WS resident applications.The applications use specific commands to perform allthe actions foreseen for the control and management ofthe associated subsystem.

2.3 TCS: VST vs VLT

Due to the maintenance requirements, there is acommitment to the VST team in agreement with ESO,to re-use as much as possible the existing VLTTelescope Control Software.

Since VLT and VST have many similarities in thecoordination and control but are very different in manyhardware solutions (they have very different size andscientific purposes), this is usually much more possiblein the workstation part than in the LCU one, whichhighly depend on the hardware used in the controlleddevices.

The main physical devices to be controlled actuallyare: azimuth altitude

Cassegrain instrument rotator

hydrostatic bearing support system motor cooling system adapter probe

focusing device pick-up mirror

atmospheric dispersion corrector two-lens corrector guiding camera

Shack-Hartmann device M1 support system

M2 support system

Comparing the VST mechanical and hardwaresolutions with the VLT ones device by device (andconsidering there are some new devices in VST notpresent in VLT) it becomes clear that in the LCUsoftware the percentage of the VLT TCS that can bereused is very low, because the differences are often solarge that it is convenient to re-write the relatedsoftware modules from scratch. The leading concept isthat wherever possible the interface (i.e. the CommandDefinition Table, see 2.2) with the outside world of thenew LCU modules is structured in order to becompatible with the existing and reusable (when this isthe case) workstation modules. A couple of examplesare briefly described in the following.

2.4 The case of M1 pad control

One of the VST subsystems whose hardware iscompletely different from the VLT one is the M1 padcontrol system. The primary mirror is supported by 84axial and 24 radial pads. The mirror sag can bemodified applying a set of forces to the astatic levers inorder to correct 3rd and 4th order aberrations as in theactive optics scheme usual in the new generation oftelescopes.

上一页第2页

你可能喜欢

热门文档

相关文档

站点地图 | 文档上传 | 侵权投诉 | 手机版
本站所有资源均来自互联网,本站只负责收集和整理,均不承担任何法律责任,如有侵权等其它行为请联系我们.
文档下载 Copyright 2013 doc.guandang.net All Rights Reserved.  -  email